Lexmark E312L User's Guide - Page 87
Parallel Strobe Adjust., Parallel Mode 2
View all Lexmark E312L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
If your printer lights look like this in configuration mode: Then your printer: Factory Default Parallel Mode 2 setting is on, the factory default. On This setting determines if the parallel port data is sampled on the leading or trailing edge of strobe. If Parallel Mode 2 is set On, the parallel port data is sampled on the leading edge of strobe. The parallel port data is sampled on the trailing edge of strobe if Parallel Mode 2 is set Off. • Do a brief button press to scroll through the settings (On, Off) for this menu item. • Do a double button press to scroll to the next menu item, Parallel Strobe Adjust. • Do a long button press to select and save a setting for this menu. As the setting is saved, all indicator lights remain on for approximately 2 seconds. Turn off the printer to exit configuration mode. 74 Appendix B: Advanced troubleshooting