Lexmark Forms Printer 2581 Technical Reference - Page 47

Draft document 2-27 Style Commands Select Print Type Style This command selects the following printing modes: • Character height - single or double • Character width - single or double • Line Spacing - single or double • Italic print • Shadow print (259x only) • Outline print (259x only) Format ESC [ @ n1 n2 m1 m2 m3 m4 Decimal 27 91 64 n1 n2 m1 0 m3 m4 Hexadecimal 1B 5B 40 n1 n2 m1 00 m3 m4 USAGE NOTES • n1 and n2 specify the number of mode bytes contained in this escape sequence. Normally, n1 is 4, and n2 is 0. • Normally, m2 is 0 (Dec) 00 (Hex). (Not supported) • m1 controls start and stop of the character modes. See the table below for values. • m3 controls line spacing and character height. It as two parts: a high-order half-byte and a low-order half-byte. The high-order half-byte of m3 controls the line spacing and the low-order half-byte controls the character height. See the table below for values. • m4 controls the character width. Only the low-order half-byte is significant in this mode byte. The high-order half-byte is ignored. See the table below for values.