Lexmark MX722 Quick Reference - Page 3
Loading the 2100, sheet tray
View all Lexmark MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
4 Load the paper stack with the printable side facedown, and then make sure that the side guides fit snugly against the paper. One‑sided printing Two‑sided printing Loading A5‑size paper a Pull up and slide the width guide to the position for A5. • Do not slide paper into the tray. • To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator. • Load envelopes with the flap side up and against the left side of the tray. • When loading letterhead, do either of the following: One‑sided printing Two‑sided printing • When loading prepunched paper, make sure that the holes on the long edge of the paper are against the right side of the tray. Warning-Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. 5 Insert the tray. 6 From the control panel, set the paper size and paper type to match the paper loaded. Loading the 2100‑sheet tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. 2 Adjust the guides. 3