Lexmark MX722 Quick Reference - Page 5

d Squeeze, and then slide the length guide to the correct position for the size of the paper being loaded. One‑sided printing Two‑sided printing 6 From the printer control panel, set the paper size and paper type from the control panel to match the paper loaded. Loading the multipurpose feeder 1 Open the multipurpose feeder. 3 Flex, fan, and align the paper edges before loading. 4 Load the paper stack with the printable side facedown. • When loading letterhead, do either of the following: • When loading prepunched paper, make sure that the holes on the long edge of the paper are against the right side of the tray. One‑sided printing Two‑sided printing 2 Adjust the guide to match the size of the paper that you are loading. 5 Insert the tray. Note: Press down the paper stack while inserting the tray. 3 Flex, fan, and align the paper edges before loading. 4 Load paper with the printable side faceup. • When loading letterhead, do either of the following: 5