Lexmark MX722 Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 54

5.2.1.2 Lexmark CX825 and CX860 Super Finisher Finisher The optional Super Finisher (SFin) supports Corner staple and Dual staple (IPDS Edge stitch). The printer automatically rotates the text 180 degrees for short-edge fed paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets that are hard to read. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied to all paper sizes. The Printer device type must always be *IPDS. How to specify Printer File parameters is shown below. 5.3.1.2.1 Corner Staple Parameters in the printer file Corner Staple.......*TOPLEFT, *DEVD, Drawing of staple placement *TOPLEFT *DEVD Text Text text text text text text. Text shown with 0 degree rotation specified in IPDS job *BOTLEFT Long-edge fed paper, leading edge *TOPLEFT *DEVD Text Text text text text text text. Text shown with 0 degree rotation specified in IPDS job Short-edge fed paper, leading edge 5.3.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples) Parameters in the printer file Edge Stitch Reference edge...........*LEFT, *TOP or *DEVD 54