Lexmark T430 Setup Guide - Page 20
Set up the printer and options, Grasp the support unit on each
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
To add an optional drawer: 1 Remove all packing material and tape from the support unit. 2 Pull the tray out of the support unit. Remove any packing material and tape from the tray. 3 Grasp the support unit on each side at opposite corners and move it to the location selected for the printer. 4 Reinstall the tray. Push it fully into the support unit. Set up the printer and options 10
10
Set up the printer and options
To add an optional drawer:
1
Remove all packing material and
tape from the support unit.
2
Pull the tray out of the support unit.
Remove any packing material and
tape from the tray.
3
Grasp the support unit on each
side at opposite corners and move
it to the location selected for the
printer.
4
Reinstall the tray. Push it fully into
the support unit.