Lexmark T430 Setup Guide - Page 26

Step6: Install printer memory or firmware cards

Get Lexmark T430 PDF manuals and user guides View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Step 6: Install printer memory or firmware cards Note: Memory options designed for other Lexmark printers may not work with your printer. CAUTION: If you are installing a memory or firmware card sometime after setting up the printer, turn the printer off and unplug the power cord before continuing. Note: You need a small Phillips screwdriver to remove the system board shield. If you do not have any memory or firmware cards to install, skip this step and go to Step 7: "Load paper" on page 22. The system board has one printer memory connector and two firmware card connectors. The instructions in this section help you install: • Printer memory cards • Firmware cards - Additional functionality - Internet capabilities - Flash memory The printer can support up to 256MB of additional printer memory and up to 32MB of flash memory. Install printer memory or firmware cards 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
16
Install printer memory or firmware cards
Step 6: Install printer memory or
firmware cards
Note:
Memory options designed for other Lexmark
printers may not work with your printer.
If you do not have any memory or
firmware cards to install, skip this step
and go to Step 7: “Load paper” on
page 22.
CAUTION:
If you are installing a memory or firmware
card sometime after setting up the printer, turn the printer
off and unplug the power cord before continuing.
The system board has one printer
memory connector and two firmware
card connectors.
Note:
You need a small Phillips screwdriver to remove
the system board shield.
The instructions in this section help you
install:
•
Printer memory cards
•
Firmware cards
–
Additional functionality
–
Internet capabilities
–
Flash memory
The printer can support up to 256MB of
additional printer memory and up to
32MB of flash memory.