Lexmark T430 Setup Guide - Page 43

Printing a menu settings page Note: For more information about using the printer operator panel and changing menu settings, refer to the publications CD. UTILITIES MENU 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 Print a menu settings page to review the default printer settings and to verify that printer options are installed correctly. 1 Make sure the printer is on. 2 Press Menu until you see UTILITIES MENU, and then press Select. 3 Press Menu until you see Print Menus, and then press Select to print the page. The message Printing Menus appears on the display. 4 Verify that the options you installed are correctly listed under "Installed Features." If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the option. See Step 6: "Install printer memory or firmware cards" on page 16 for more information. 5 Verify the amount of memory installed is correctly listed under "Printer Information." 6 Verify that the paper trays are configured for the sizes and types of paper you loaded. Printing a network setup page Note: Save the network setup page after it prints. You will use it in the other steps. If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that helps you configure for network printing. 1 Make sure the printer is on. 2 Press Menu until you see UTILITIES MENU, and then press Select. 3 Press Menu until you see Print Net Setup, and then press Select to print the page. 4 Check the first section on the network setup page and confirm that Status is "Connected." If Status is "Not Connected," your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution. Afterwards, print another network setup page to verify that you are connected to your network. Verify printer setup 33