Lexmark T430 Setup Guide - Page 41
Attaching the power cord, Ready
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Attaching the power cord 1 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. 2 Turn on the printer. After the printer completes its internal tests, the Ready message indicates that the printer is ready to receive jobs. If you see a message other than Ready on the display, follow these steps to clear the message: a Launch the publications CD. b Select your language. c Click Printing. d Click Understanding printer messages, and then follow the instructions on your screen. 3 Make sure your computer and any other peripherals are turned on. 4 Continue with "Verify printer setup" on page 32. Attach cables 31
31
Attach cables
Attaching the
power cord
1
Plug one end of the printer power cord into the socket at the
back of the printer and the other end into a properly grounded
outlet.
2
Turn on the printer.
After the printer completes its internal tests, the
Ready
message indicates that the printer is ready to receive jobs.
If you see a message other than
Ready
on the display, follow
these steps to clear the message:
a
Launch the publications CD.
b
Select your language.
c
Click
Printing
.
d
Click
Understanding printer messages
, and then follow
the instructions on your screen.
3
Make sure your computer and any other peripherals are turned
on.
4
Continue with “Verify printer setup” on page 32.