Lexmark T430 Setup Guide - Page 27
Removing the sidecover and shield, Install printer memory or firmware cards
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removing the side cover and shield 1 Open the upper front door and the multipurpose feeder door. Tab Tab 2 Firmly press on the two tabs simultaneously to free them from their slots. 3 Slide the side cover off of the back of the printer as you swing it out to remove it. Install printer memory or firmware cards 17
17
Install printer memory or firmware cards
Removing the side cover and shield
1
Open the upper front door and the
multipurpose feeder door.
2
Firmly press on the two tabs
simultaneously to free them from
their slots.
3
Slide the side cover off of the back
of the printer as you swing it out to
remove it.
Tab
Tab