Lexmark T430 Setup Guide - Page 38
touches the stack of print media., Slide the width guide until it lightly
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Note: Do not exceed the maximum stack height indicated. Overfilling the feeder may cause jams. Stack height limiter 6 Place the print media against the left side of the multipurpose feeder, with the print side up and facing into the multipurpose feeder. 7 Push the print media forward, but do not force it. 8 Slide the width guide until it lightly touches the stack of print media. Refer to the publications CD for additional information on loading different types of media such as letterhead, transparencies, card stock, and envelopes. Load paper 28
28
Load paper
Note:
Do not exceed the maximum stack height
indicated. Overfilling the feeder may cause jams.
6
Place the print media against the
left side of the multipurpose
feeder, with the print side up and
facing into the multipurpose
feeder.
7
Push the print media forward, but
do not force it.
8
Slide the width guide until it lightly
touches the stack of print media.
Refer to the publications CD for
additional information on loading
different types of media such as
letterhead, transparencies, card
stock, and envelopes.
Stack height limiter