Lexmark T522 Service Manual - Page 150

4520-xxx Printer Setup Setting the Page Count This lets the servicer change the page count from the diagnostic menu. This is used whenever the engine board is replaced because this board contains the printer NVRAM Memory where the page count is stored. To set the Page Count: 1. Select Page Count from the Diagnostic menu. • The current page count displays. • The leftmost digit blinks, indicating it is the first digit to be changed. 2. Press either Menu until the value you want displays. 3. Press Select to move to the next digit, press Menu until the value you want displays. Continue with each digit until you set the page count. You can skip any digit by pressing Select. 4. Press Select to save the new page count in NVRAM. 5. Press Return/Stop to exit the Diagnostic menu. Viewing the Permanent Page Count The Permanent Page Count can only be viewed and cannot be changed. To view the Permanent Page Count: 1. Select Permanent Page Count from the menu. 2. Press Return/Stop to exit the Diagnostic menu. 3-18 Service Manual