Lexmark T522 Service Manual - Page 41
x1=Leading Edge of Media State, x2=Trailing Edge of Media
UPC - 734646620642
View all Lexmark T522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4520-xxx First 6 Bytes Sub Error Code Data - Note: xx can be any value. Explanation 84 xx 20 x1 The imaged page is not the expected page. x2 (x1=Media Size, x2=Media Source) 84 xx 21 x1 x2 Check the pass thru sensor to make sure it is operating properly. If no problem is found, it may be necessary to try a new pass thru sensor. The smart tray x did not pick a sheet of paper. (x1=Media Size, x2=Media Source) 84 xx 22 x1 x2 84 xx 23 x1 x2 84 xx 25 84 xx 26 Check tray x auto compensator and tray parts for correct operation. If no problem is found, go to the "Input Tray(s) Service Check" on page 2-62. This code indicates that the media activated the input sensor before the printer EP was ready. (x1=Leading Edge of Media State, x2=Trailing Edge of Media State) The transfer servo never started. (x1=Media Size, x2=Leading Edge of Media State) This code indicates that the media has activated the input sensor before the printhead has locked. Enough time has elapsed since printhead start to expect a lock. One of the following may be failing: *Printhead Assembly *System Board *Printhead Cables This code indicates that media has activated the input sensor; however, the printhead fell out of lock condition or not enough time elapsed since the printhead start to expect a stable lock. The media may have also reached the input sensor early. Diagnostic Information 2-13