Lexmark T522 Service Manual - Page 196
Fuser Narrow Media Sensor/Flag Assembly Removal, Fuser Exit Sensor Flag Assembly Removal
UPC - 734646620642
View all Lexmark T522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
4520-xxx Fuser Narrow Media Sensor/Flag Assembly Removal 1. Remove the fuser assembly. 2. Cut the cable tie from the fuser board cable bundle. 3. Disconnect the narrow media sensor from the fuser board. The sensor can be removed without removing the lower exit guide assembly. 4. Noting the location of the sensor flag, depress the two lower sensor mounting pins and remove the sensor assembly. 5. Align the sensor flag with the flag opening, in the lower exit guide assembly, and snap the sensor into place. Be sure the sensor operates correctly. 6. Replace the cable tie on the cable bundle. Fuser Exit Sensor Flag Assembly Removal 1. Cut the cable tie from the fuser board cable bundle. 2. Disconnect the exit sensor from the fuser board. 3. Noting the location of the sensor flag, depress the two lower sensor mounting pins and remove the sensor assembly. 4. Align the sensor flag with the flag opening, in the lower exit guide assembly, and snap the sensor into place. Be sure the sensor operates correctly. 5. Replace the cable tie on the cable bundle. Note: The exit sensor assembly can be removed without removing the lower exit guide assembly. Make sure the narrow media sensor flag is correctly positioned before snapping the sensor in place. 4-34 Service Manual