Lexmark T652DTN Help Menu Pages - Page 19

Quality guide Page 19 of 42 Quality guide The Quality guide helps users understand how operations available on the printer can be used to adjust and customize output. Quality menu Menu item Print Resolution 300 dpi 600 dpi 1200 dpi 1200 IQ 2400 IQ Pixel Boost Off Fonts Horizontally Vertically Both Directions Toner Darkness 1-10 Enhance Fine Lines On Off Gray Correction Auto Off Brightness -6-6 Description Specifies the printed output resolution Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ. Enhances the printed quality of small fonts and graphics Notes: • Off is the factory default setting. • Fonts applies this setting only to text. • Horizontally darkens horizontal lines of text and images. • Vertically darkens vertical lines of text and images. • Both Directions darkens horizontal and vertical lines on text and images. Lightens or darkens the printed output Notes: • 8 is the factory default setting. • Selecting a smaller number can help conserve toner. Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts Notes: • Off is the factory default setting. • To set Enhance Fine Lines using the Embedded Web Server, type the network printer IP address in a browser window. Adjusts the contrast enhancement applied to images. Note: Auto is the factory default setting. Adjusts or darkens printed output and conserves toner Notes: • +0 is the factory default setting. • A negative value will darken text, images, and graphics. A positive value will lighten them.