Lexmark X925 Forms and Bar Code Card Technical Reference Guide
Lexmark X925 Manual
View all Lexmark X925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark X925 manual content summary:
- Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 1
Forms and Bar Code Card 3.2 Technical Reference Manual May 2011 www.lexmark.com - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 2
will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. For Lexmark technical support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 3
Monaco New York Oxford Palatino Stempel Garamond Taffy Times New Roman Univers Wingdings Apple Computer, Inc. Apple Computer, the property of their respective owners. © 2011 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 4
7 Two-dimensional symbologies 7 Compressed data formats 8 Checksum calculation 8 Visual Bar Code Designer 8 HP BarDIMM compatibility intercept 8 Supported Lexmark PCL 5 and PostScript bar codes 8 Chapter 4: PCL 5 emulation: HP 11 One-dimensional bar codes 11 Defining characteristics 11 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 5
for MaxiCode data 27 Chapter 5: PCL 5 emulation: Lexmark 29 New PCL 5 commands to support bar codes 29 Bar code descriptor ESC&x#W[descriptor data 29 Transfer bar code data ESC&y#W[bar code data 29 Compatibility safeguard 29 Lexmark symbology assignments 31 One-dimensional bar codes 32 Post - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 6
features 97 Adding fonts to existing printer objects 97 Loading forms to a flash drive 97 Data capture to a flash drive 97 Creating a PIN for formsets Card listens to 99 Use forms stored on a flash drive 100 RFID support 100 Printing all forms 100 Vertical text centering 100 Data types - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 7
Forms files on printer directory 104 Appendix A: Feature Summary 105 Appendix B: Supported bar codes 108 all symbologies 154 String errors 154 Errors specific to symbologies 156 Appendix F: Deviations 158 HRT widths and heights 160 PDF417 image widths and heights 161 MaxiCode capacity 161 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 8
-board user flash • Forms Card: - Adding fonts to existing printer objects - Loading Forms from a flash drive - Data capture to a flash drive - Disabling the PJL LPORTROTATE command when Forms and Bar Code Card is installed - Disabling Merge Mode when downloading formsets • Bar code: - Intelligent - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 9
the FREESCAPE alternate escape code feature. A supported printer with the Forms and Bar Code Card includes support for: • OCR-A and OCR-B as • End User License Agreement • A Readme file that contains download information, requirements, and installation instructions Follow the instructions in the - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 10
3 Overview With the Forms and Bar Code Card installed, you can specify bar codes for printing in PCL 5 using the following techniques: 1 Standard PCL 5 font selection commands (used in the HP BarDIMM Pro products) 2 Special Lexmark advanced PCL 5 commands for bar codes Cursor positioning Cursor - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 11
and automatically places the character(s) according to the symbology specifications. Fixed length data formats can be sent with or HP BarDIMM Pro version 3.3a option. Supported Lexmark PCL 5 and PostScript bar codes The following is a list of supported one-dimensional bar codes: • Australian Post - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 12
• EAN/JAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • EAN/JAN-13 • EAN/JAN-13 with 2-digit supplemental • EAN/JAN-13 with 5-digit supplemental • EAN-128 • French Postal 3 of 9 A/R • German Postal 2 of 5 (Leitcode and Identicode) • HIBC • Interleaved 2 of 5 • - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 13
MicroPDF417 • PDF417 • QR Lexmark-unique PCL 5 command description Lexmark-unique PCL 5 definitions provide support for new bar code Transfer bar code data-ESC&y#W [bar code data] This command is used to transfer a raw block of bar code data to be encoded according to the specifications - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 14
Code Card. One-dimensional bar codes With Forms and Bar Code Card installed, font selection commands in the incoming PCL 5 data stream are typeface value is one of those given, then special bar code generation firmware will process the font selection command. Otherwise, PCL 5 emulation proceeds - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 15
followed by an escape sequence that fully specifies a normal text font. Example: Esc(s1p10v0s0b4101T This returns the text following a bar code to 10-point CG Times with proportional spacing, normal style, and medium stroke weight One-dimensional bar codes 12 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 16
2 = 3 = 4 = 5 = Courier (default for all bar code symbologies) Letter Gothic Univers Univers Condensed CG-Times OCR-B Example: Esc(s304h24620T Selects EAN/JAN-8 with automatically sized, CG Times Bold text. Since parameters v, p, b, and s are not specified, their values default to: v p b1, s1 b2 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 17
Command Esc(s#V or AEC)s#V Esc(s#1,#2,#3,#4B or AEC)s#1,#2,#3,#4B Esc(s#1,#2,#3,#4S or AEC)s#1,#2,#3,#4S Function/Parameters Selects the height of the bar in points (1/72 inch). Except in symbologies where #V is a fixed value, the bar height can be varied from a minimum of 3 points (0.04 inch, 1 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 18
PCL 5 function parameter list Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") Selects the bar code symbology Default parameters1 Characters text is specified. * = Fixed value, cannot be changed N = Numeric M = Mixed One-dimensional bar codes 15 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 19
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the bar code symbology printed if embedded text is specified. 6 12 18 24 M - * = Fixed value, cannot be changed N = Numeric M = Mixed Yes No No No Yes No Yes No Yes No Yes Yes3 Yes3 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 20
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the bar code printed if embedded text is specified. 8 16 24 32 N 13 * = Fixed value, cannot be changed N = Numeric M = Mixed Yes3 Yes No Yes No Yes Yes Yes Yes Yes Yes Yes Yes - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 21
if embedded text is specified. * = Fixed value, cannot be changed N = Numeric M = Mixed Post 4-State bar code descriptors the Lexmark bar code descriptor for Australia 4-State Postal bar codes, the following correspondences exist when using this technique: Bar Width (in 1/100 mm units): Bar - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 22
mode, using typeface 24780) In relation to the fields of the Lexmark bar code descriptor for Singapore 4-State Postal bar codes, the following (in 1/100 mm units): Bar Pitch (in bars per inch): Tracker Height (in 1/100 mm units): Ascender, Descender Offset (in 1/100 mm units): Fixed at 47 Fixed - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 23
It comes in two versions: - an RSS Truncated version for small item marking applications, and - a larger RSS Stacked Omnidirectional version which can be scanned omnidirectionally. Note: Forms and Bar Code Card does not support the RSS Stacked Omnidirectional bar code. One-dimensional bar codes 20 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 24
-14 Limited • 24815T specifies RSS-14 Expanded Optional Selects the height of the bars in 1/72" (same units as fonts). Note: Values lesser than the minimum uses the corresponding default value for the specific RSS bar code type. Optional Selects the width of the bars. One-dimensional bar codes 21 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 25
RSS-14 AIM specification values. • Each of the V parameter values is considered in the RSS-14 AIM specification as a multiple of "X", which is a "module width", assumed to Mail bar code Intelligent Mail bar code is used by the Postal Service to sort and track letters and flats. It combines data from - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 26
The HP BarDIMM version 5.0 supports the Intelligent Mail bar code. The version 5.0 BarDIMM command for Intelligent Mail has no PCL parameters. It is bar code. Note: Intelligent Mail uses only the values 1, 4, and 5. Other values not specified will be replaced with 1. One-dimensional bar codes 23 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 27
. Description Required 24840T Optional Selects bar height bar height to 1/72" (same units as fonts) Note: Values from 0 to 2 are the same as the Parameters V2 and V3 are derived from the ELMICRON specification. In the HP BarDIMM Pro specification, the Codablock V parameter #1 is the single line - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 28
height in dots (1/600 inch). Since the Data Matrix modules are square, this parameter also determines the small module width. Note: Using a value of 0 is the same as using a value of 10 (default). Notes: • HP BarDIMM specification contains only the PCL "B" parameter by itself. • The Data Matrix - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 29
time manually Transfer Bar Code Descriptor command to print PDF417 symbols. In relation to the fields of the Lexmark bar code descriptor for PDF417, the following correspondences exist when using this technique: ECC Level: Units Enumeration for X Dimension: X Dimension (in X Dimension units - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 30
4 = Ultra High reliability/ECC level (H), 30% damage allowed. Optional Specifies module height (and width) in dots (1/600 inch). Minimum value is 1. Optional exist for data sent using the Lexmark Transfer Bar Code Data command to print MaxiCode symbols, with the following change to rule 1: The input - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 31
In relation to the fields of the Lexmark bar code descriptor for MaxiCode, the following correspondences exist when using this technique: Mode: Specified in the data The Typeface (Esc (s#T) value for MaxiCode is 24800. Two-dimensional bar codes 28 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 32
5 PCL 5 emulation: Lexmark This section discusses the Lexmark-specific commands implemented in the Forms and Bar Code Card. New PCL 5 commands to support bar codes Support of new bar code functionality requires new Lexmark-unique PCL 5 definitions that provide access to the new functionality. Two - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 33
the second bar width in bar dimension units (#b2 parameter) Specifies the second space width in bar dimension units (#s2 parameter) Specifies the third bar width in bar dimension units (#b3 parameter) Specifies the third space width in bar dimension units (#s3 parameter) PCL 5 emulation: Lexmark 30 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 34
Description Specifies the fourth bar width in bar dimension units (#b4 parameter) Specifies the fourth space width in bar dimension units (#s4 parameter) Lexmark symbology assignments This table describes both new and existing Lexmark symbology assignments: Bar code type 2-D bar code 2-D bar code - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 35
One-dimensional bar codes Post 4-State bar code descriptors (Lexmark) Bar code descriptor for Australian Post 4-State bar codes Byte Field name Range Default value Description 0-1 Symbology ID - 20 (dec) Selects Australian Post 4-State symbology - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 36
total height of an ascender or descender is the sum of this field and the tracker height. 6-15 Reserved - - - Note: All seven code formats are supported. The format is implied on the type of data received. Embedded spaces and commas are allowed. One-dimensional bar codes 33 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 37
64 (hex) Sets overall bar code size This value called "a" is a unit-less value multiplying factor used below in other parameters. 3 Bar Width 0.5a-0.7a width (a = bar code size from byte 2) 5 Timing Bar Height 1.05a-1.35a 1.2a Sets the timing bar height (a = bar code size from byte 2) - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 38
the data characters. Invalid characters in the data are ignored, and do not produce any error message. FIM symbols are printed according to the USPS specification. Bar height is fixed at 5/8 inch, and bars and spaces have a fixed width of 1/32 inch. Cursor positioning is handled the same as for one - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 39
-18 19-20 21-22 23-24 25-31 Field name Symbology ID Text Location Text Typeface Text Style Bar Height Units Bar Height Bar/Space Width Units Bar Width #1 (Module Width) Space Width #1 Bar Width #2 Space Width #2 Bar Width #3 Space Width #3 Bar Width #4 Space Width #4 Reserved Range - This value is - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 40
Data consists of an 18-digit identification code, which is composed of the following: • A 2-digit post code • A 2-digit billing district code • A 6-digit customer account number • An 8-digit item number To enhance readability, "." characters (ASCII 46) may appear anywhere in the data; they are - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 41
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 42
printed with the symbol. The ISBN checksum digit is not verified or replaced by a calculation in the Forms and Bar Code Card. An invalid length dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 43
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 44
of an 8-digit ISSN, followed by a two-digit price code, optionally followed by a two- or five-digit The ISSN checksum digit is not verified or replaced by a calculation in the Forms and Bar Code the new units. In other words, the parameters are in "units", and if the "units" measurements change, so - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 45
No HRT 2=Embedded 3=HalfEmbedded 4=Under 5=Above 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB 0=Regular 1=Italic 2=Bold (default) 3=Bold Italic 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units Default value Description n/a Required • 112 (dec) or 00 70 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 46
-12 Space Width #1 (Code 128 space 1, or Code 39 Narrow) Type int int int int Range 150-600 (dec) 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units 5-27 (dec) 5-27 (dec) Default value Description 240 (dec) 00 F0 (hex) Optional Corresponds to HP #v parameter in the specified - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 47
HRT) 1=No HRT 4=Under 5=Above int 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB int 0=Regular 1=Italic 2=Bold 3=Bold Italic int 0=default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units [int int] Minimum: 307 (dec) 01 33 (hex) Maximum: There - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 48
13-14 Bar Width #2 (Wide) Type Range Default value Description int 0=default 0 or 2 (dec) Optional (1/600" units) 00 or 02 (hex) Specifies units for bar and space 1=1/300" widths units 2=1/600" units 3=1/1200" units [int int] 12-24 (dec) 00 0C-00 18 (hex) 12 (dec) 00 0C (hex) Optional - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 49
(dec) or 18 (hex) result in a pitch of 24. Notes: • PLANET is called from PCL using the block-call method. • For more information on the specifications implemented on the PLANET code, see Appendix B and C of the USPS PLANET - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 50
the location of human-readable text printed with the bar code. Note: Intelligent Mail uses only the values 1, 4, and 5. Other values not specified will be replaced with 1. These bytes are ignored. Note: • Intelligent Mail is called from PCL using the block-call method. One-dimensional bar codes 47 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 51
Lexmark) Bytes 0-1 2-3 4-5 MSB LSB Range Symbology Symbology n/a ID byte 1 ID byte 2 (00x) (03x) Default (if not specified) n/a Reserved X dimension byte 1 (in Units) Units X dimension byte 2 (in units) 0=Default 1=1/300" units 2=1/600" units 3=1/1200" units of the module (white or - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 52
Note: The range of values of the Y dimension is between 2 to 5 times the values of the X-dimension. Any value beyond that range are clipped appropriately and set to the minimum and maximum values. Sets the Y dimension of the module (white or black rectangle) in one-hundredths of an inch. The default - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 53
units used in specifying the X dimension (the smallest element width). Supported values are 01x for 300 dpi units, 02x for 600 dpi units, and 03x for 1200 dpi units disable truncation. Rows: (Default = 00x) This can be used to manually set the number of symbol rows. Using aspect ratio, both rows and - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 54
= 16 will be used in place of any specified values for rows and columns that exceed this limit. Any time the data given for a symbol requires a larger symbol than that specified by a manual setting of rows and columns, the rows and columns setting will be ignored, and the default aspect ratio of - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 55
Full symbol with enhanced error correction Reader program with standard error correction MaxiCode notes: Depending on the mode, the input data sent with the Transfer Bar Code Data command must follow these rules: • For all modes, the input data must start with a label-number field and number-of - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 56
character in code set A as defined in AIM spec). Codes longer than 6 characters will be truncated. . • The country code and class of service must each be 3 digits in length and data that will be sent with the transfer bar code data command: Mode 2, by 44 rows. A specific and limited set of symbol - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 57
support of NULL (hex 00) characters is not supported at this time, due to possible string termination issues within the printer. The basic block of the MicroPDF417 is the black or white module or rectangle. The nominal dimensions of the module width are two times Sets the units used in specifying - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 58
of values of the Y dimension is between 2 to 5 times the values of the X dimension. Any value beyond that range maximum values. Sets the Y dimension of the module (white or black rectangle) in 100th of an specified as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 59
or expiration date). The composite symbol always includes a linear component so that the primary identification is readable by all scanning technologies, and so that 2D imagers can use the linear component as a finder pattern for the adjacent 2D composite component. Also, it always includes a multi - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 60
Digit: The check digit is an additional digit used to verify that a bar code has been scanned correctly. Since a scan can produce incorrect data due to inconsistent scanning speed, print imperfections, or a host of other problems, it is useful to verify that the rest of the data in the bar code has - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 61
UPC-E uses the "left-hand odd" and "left-hand even" encoding character sets from the EAN-13 encoding standard. Check character 0 1 2 3 4 5 6 7 8 9 Number system 0 encoding EEEOOO EEOEOO EEOOEO EEOOOE EOEEOO EOOEEO EOOOEE EOEOEO EOEOOE EOOEOE Number system 1 encoding OOOEEE OOEOEE OOEEOE OOEEEO - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 62
f Check digit, encoded as right-hand character g Right-hand guard bars, or end sentinel, encoded as 101 4 EAN-13 (including +2 and +5 variants) EAN-13, based on the UPC-A standard, was implemented by the International Article Numbering Association (EAN) in Europe. The only difference between a UPC-A - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 63
best before dates, batch numbers, quantities, weights and many other attributes the user needs. Each AI tells the system what kind of data will follow and in in a linear symbol for use on small items that will not be scanned at the point-of-sale. RSS Expanded encodes EAN/UCC item identification plus - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 64
(s36b24810T01234567890123|Lexmark(s0p12h10vsb4099T • Beginning with a RSS-14 24810T sequence • Followed by RSS-14 data "01234567890123" • Followed by a "|" pipe character • Followed by the Composite data string: "Lexmark" • Followed by a complete 4099T sequence to change back to a default - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 65
PCL specifications for composite bar codes Field Name Type Range Default (if not specified) bar code may be varied in only two directions. • The module height of the linear component is varied using the V parameter. • The module width of the linear component is varied using the B parameter. - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 66
Unit Condensed 4=Roman 5=OCRB 0 (dec) or 00 (hex) Optional Corresponds to the HP #h parameter Note: When the value given is not within the defined range, the value will be set to default (Courier). The dimensions of the composite bar code may be varied in only two directions. • The module height - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 67
card UPC Half Scalable In option card UPC Half Narrow Scalable In option card UPC Half Thin Scalable In option card USPS POSTNET Bitmap In printer Note: To obtain the PCL 5 ESC sequences used to select these fonts, print the PCL 5 font list from the - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 68
a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user-selected alternative PCL 5 sequence: Use either of the commands listed in the following table to change the AEC. The # represents the ASCII code of the AEC. Use one of - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 69
To set an AEC from the printer control panel: 1 From the Bar code menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Bar code menu, select ESC Character. 4 Select an AEC from the menu. You can disable the AEC by setting Alt ESC Code to Off. FREESCAPE emulation 66 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 70
PostScript emulation This section describes additional PostScript emulation operators that are supported when a Forms and Bar Code Card is installed. These operators enable printing of bar code symbologies with user specified parameters from within the PostScript data stream. This functionality is - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 71
data format. When this is the case, the Forms and Bar Code Card performs the checksum calculation and automatically places the character(s) per the symbology specifications. Fixed length data formats can be sent with or without checksum characters. PostScript emulation 68 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 72
PostScript emulation operator Operator barcodeshow Function/parameters String dict barcodeshow This function paints the specified bar code symbol at the currentpoint and advances the currentpoint by the displacement of the symbol (as returned by the barcodewidth operator). This is similar to the - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 73
18 27 36] /Height 210 /EmbedText /Embedded /FontName /Courier-Bold >> barcodewidth This operation returns two values on the stack, indicating the change in currentpoint in the x and y direction that results from a barcodeshow with the same data. This example specifies a bar code with a leading - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 74
see "Values for /Symbology key" on page 73. /Spaces [num num num num] Optional In /Units; the default value is based on the symbology, see "Values for /Symbology key" on page 73. and /PrintCheckChar are always set to true and cannot be changed to false. Arguments for one-dimensional bar codes 71 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 75
are printed at half the height of the text. 1 For the French postal symbology, /Special and /PrintCheckChar are always set to true and cannot be changed to false. Arguments for one-dimensional bar codes 72 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 76
key Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default for the possibility of an "X" as a checksum 8 16 24 32 N 12 * = Fixed value, cannot be changed N = Numeric M = Mixed No Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes3 Yes3 Yes3 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 77
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default Parameters1 /Bars & hyphens) 5 Except for the possibility of an "X" as a checksum * = Fixed value, cannot be changed N = Numeric M = Mixed Arguments for one-dimensional bar codes 74 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 78
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code for the possibility of an "X" as a checksum 150* 150* / or | * = Fixed value, cannot be changed N = Numeric M = Mixed Yes Yes Yes Yes Yes3 Yes3 Yes3 Yes3 Yes3 Yes3 Yes3 No No No No Arguments for - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 79
-MediumItalic /Univers-BoldItalic /Univers-Condensed-Medium /Univers-Condensed-Bold /Univers-Condensed-MediumItalic /Univers-Condensed-BoldItalic /CG-Times /CG-Times-Bold /CG-Times-Italic Example: /FontName /Courier Font attribute for HRT regular bold italic bold italic regular bold italic bold - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 80
/FontName /CG-Times-BoldItalic /OCR-B Example: /FontName /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 81
the tracker height. Sets the FCC 0 (dec) [integer] 150 150 (dec) [array of integers] - Sets the encoding table Optional Sets the quiet zone in /Units The value is 1/100 mm Singapore Post 4-State bar code Key /Symbology /Bars Range - 38-63 (dec) /Spaces 20-24 (dec) /TrackerHeight 102-152 (dec - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 82
Key /QuietZone /Units Range [int int] - Default value 150 150 (dec) [array of integers] - Description Optional Sets the quiet zone in /Units. The value is 1/100 mm Post 4-State bar code descriptors 79 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 83
Descender Offset /QuietZone /Units [int int] - times /Size 3.4-3.6 times the / 3.6 times /Size Size parameter above Description Identifies the bar code symbology Optional The overall size of the bar code is in decipoints (1/10 pt). Sets the bar width to 1/100 mm The range for this value changes - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 84
code Key /Symbology /Bars Range - 38-63 (dec) /Spaces 20-24 (dec) /SyncBarHeight 102-152 (dec) /UpDnBarHeight 160-216 (dec) /QuietZone [int int] /Units - Default value /DutchPostal 50 (dec) [integer] 22 (dec) [integer] 127 (dec) [integer] 188 (dec) [integer] [150 150] [array of integers - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 85
. Sets the space width The default value is 11/600 inch. Optional Sets the quiet zone in /Units Optional The value is 1/600 inch /BarHeight must be: • Greater than or equal to 20 mm for module widths less than or equal to 0.45 mm (0.0177 inches) • Greater than or equal to 23 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 86
Intelligent Mail Key /Symbology /Units Type name name /Bars int /Pitch int /TrackerHeight int /QuietZone [int The value is fixed. Sets the bar width in /Units Sets the number of bars that print per inch Sets the tracker height in /Units The value is fixed. Sets the ascender and descender - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 87
defined range are appropriately clipped and set to the minimum and maximum values. [6] (dec) [06] (hex) /Under Optional Sets the space widths in /Units Note: Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Defines if and where the HRT - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 88
Width 1 : Bar/ Space Width 2. • For HIBC 128, 1:2:3:4 = Bar/Space Width 1 : Bar/ Space Width 2 : Bar/Space Width 3 : Bar/ Space Width 4. When an invalid value is supplied for Bar/Space Widths 2, 3 or 4, the values of Bar Width 1 and Space Width 1 are used to compute for the valid values of Bar/Space - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 89
x Bar Width 1. • Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Sets the space widths in /Units Notes: • The range of values for Space Width 2 is dependent on the value of Space Width 1, where Min=2.25 x Space Width 1 Max=3 x Space Width - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 90
] (dec) or • [96 96] (hex) Optional Note: Values less than the minimum use the default value of [150 150]. Note: For more information on the specifications implemented on the PLANET code, refer to Appendix B and C of the USPS PLANET - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 91
. Example: For a height-to-width ratio of 2/3, set /AspectRatio equal to 0.67. Optional The value is 1/600 inch. Required Sets the module width in /Units. Specifies the X dimension (smallest element width) Example: A value of 15 specifies an element width of 15/600 inch. Required Specifies the bar - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 92
specified as a percentage. A valid non-zero /Errorpercent value overrides /ErrorLevel. See "/Error Percent" on page 90. Optional This is not supported. Optional This is not supported. Optional The default value is false (no truncation). If the value is set to true, then the right row indicator and - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 93
data to be encoded %specifies PDF417 symbology %rows and columns determined by /AspectRatio %height / width ratio is 1 / 2 %smallest element width in 600th units %smallest element width = 20/600ths %bar height = 40/600ths %number of error code words = 8 %because they are not specified, /Truncated - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 94
the size of the module element in /Units. The minimum value supported is 1. Arguments for MaxiCode the mode, the input data sent with the Transfer Bar Code Data command must follow these rules the postal code, country code, and class of service fields must follow the label fields. Each field must - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 95
spec). Codes longer than 6 characters are truncated. Codes shorter than 6 characters are padded with spaces. • The country code and class of service must should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 96
dec) 00 (hex) 0 (dec) 00 (hex) Description Required Identifies the bar code symbology (/MicroPDF417) Optional /Units is used for /ModuleWidth and /ModuleHeight calculations. Optional Sets the X dimension of the module (white or black rectangle) in 100th of an inch. To set the X dimension to default - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 97
Key /FontName /QuietZone Type name [int int] Range Default value See these sections: /Courier-Bold • Values for /EmbedText key • Values for /FontName key Minimum: [0 0] (dec) Maximum: [1200 1200] (dec) [150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed When - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 98
Units is used in the calculations. /Height (linear component) int Dependent on the Dependent on the Optional module height range of the linear component. default module example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 99
module width range of the linear component. default module width of the linear component. Sets the X dimension of the two-dimentional module sequence. For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins with " - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 100
supplement to the instructions provided in the Forms and Bar Code Card User's Guide. Adding fonts to existing printer objects Users can add fonts to printer objects in Forms Manager without having to delete and then recreate the printer object. Loading forms to a flash drive Users can download forms - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 101
can now specify cc and bcc recipients when sending an e-mail through the printer. Note: This function is available only on multifunction printers that support e-mail and/or fax. Print, e-mail, and fax concurrently Users have the option to print a document that is being faxed or e-mailed. Note: This - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 102
in cases where a user wants to merge multiple installed, the PJL LPORTROTATE command will not be supported. Disabling Merge Mode while downloading formsets When downloading formsets with Merge Mode enabled, the formsets are scanned as normal incoming data. This significantly lengthens the time - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 103
flash drive. RFID support Through LFJT (Lexmark Forms Job Ticket) support, Forms Card allows users to specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for specifying those options. The LFJT is embedded into the merged PDF by the Forms Card firmware. The PDF is - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 104
data Performs the same actions as the ZPL filter, except it uses "@" as the "format instruction" prefix Forms Card font support Forms Card has three types of font support. • Supported-For supported fonts, Forms Card uses the appropriate font file. • Recognized-For recognized fonts, the Forms Card - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 105
Bubble font This font is used for standardized testing forms that are optically read for grading purposes. It is available in Forms Composer when the font "OCRB in Bubbles" is used. The following is a character map for use while designing the formset. Bubble font 102 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 106
than that of the printer, a user could easily create a form where not all characters will print. The user can stipulate a supported code page via Forms Composer. Five font families support the international character set. • Intl-Courier • Intl-CG Times • Intl-Univers • Arial MT • Times New Roman PS - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 107
files on printer directory The Forms and Bar Code Card places forms files on the printer in the formsmerge directory. These files are visible if the user prints a directory page from the printer control panel. These files must not be tampered with in any way. Forms files on printer directory 104 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 108
on Y Forms Card NA NA Forms Card Features UTF-8, UTF-16 Y Y2 NA DBCS file names Y1 Y Y DBCS bold & italic Y Y NA 1 Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file names, etc.) 3 Requires an RFID-enabled - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 109
NA NA Use forms stored on a flash Y drive NA NA NA Print all forms Y NA NA data PDF version 1.3-1.6 1.3-1.6 1.6 NA Floating subforms Y Y Y NA Error page control Printer Operator Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF-16 support - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 110
Alternate escape code (AEC) Y Human-readable text fonts • Courier Y Y Y • SM Unit Y Y Y • SM Unit Condensed Y Y Y • SM Gothic Y Y Y • Roman Y Y Y • OCR B Y Y Y • PLANET Y Y Y 1 Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 111
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image One-dimensional bar code symbologies Codabar installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 112
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Code 3 of 9 Sample image Y Y Y Y Y Y Code 3 installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 113
be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 114
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name HIBC128, HIBC 39 Y3 Y Y Y Y Sample image Comments The HIBC (Health installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 115
Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Interleaved 2 of 5 Sample image Y Y Y Y Y Y installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 116
Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Matrix 2 of 5 Sample image Y Y Y Y Y Y2 Matrix installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 117
Producer Lexmark Optra Forms Bar code name Two-dimensional bar code symbologies Data Matrix Y3 Y Y Y Y Sample image Comments installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 118
be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 119
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name MicroPDF417 Y3 Y Y Y Y Sample image Comments MicroPDF417 is a installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 120
be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 121
Producer Lexmark Optra Forms Bar code name Composite bar code symbologies Composite + UPC Y3 Y Y Y Y Sample image Comments An installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 122
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Composite + EAN Y3 Y Y Y Y Sample image Comments Composite + UCC/ Y3 Y Y Y Y EAN 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 123
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Composite + RSS-14 Y3 Y Y Y Y Sample image Comments 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 124
Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name EAN/JAN-8, JIS--S-UCC Sample image Y Y Y Y Y Y EAN installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 125
Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name EAN/JAN-13, JIS-UCC Sample image Y Y Y Y Y Y EAN installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 126
Lexmark Optra Forms Bar code name Sample image EAN 128, UCC-128, Y Y Y Y Y Y EAN/UCC-128 Comments The EAN/UCC-128 specification installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 127
image Comments RSS-14 is a linear symbology that facilitates omnidirectional scanning. It encodes 14 digits of numerical data used to identify Global Trade Item Numbers (GTIN) in the supply chain. RSS-14 Truncated allows truncation (shortening the height of a bar code) of the height to 13 times - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 128
v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-A Sample image Y Y Y Y Y Y UPC-A + installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 129
v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-E Sample image Y Y Y Y Y Y UPC-E + installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 130
Lexmark Optra Forms Bar code name Sample image of data, allowing varying quantities of customer-specific data to be added to the basic installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 131
v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Dutch Post 4-State Y Y Y Y Y installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 132
v3.2 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image German Postal 2 of Y Y Y Y Y installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 133
Document Producer Lexmark Optra Forms Bar code name Sample image Singapore used by the United States Postal Service (USPS) canceling installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 134
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name USPS POSTNET 5-digit ZIP Code Sample image Y Y Y Y Y Y2 installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 135
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name USPS tray label 10-digit 2 of 5 Sample image Y Y Y Y Y Y2 installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 136
C Forms Card fonts Single-byte Forms Card fonts Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt Albertus-ExtraBold Albertus-Medium AlbertusMT AlbertusMT-ExtraBold AlbertusMT-Italic AlbertusMT-Light AlbertusMT-Medium Antique Olive (W1) - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 137
Font name AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold ArialCE-BoldItalic ArialCE-Italic Arial-Italic - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 138
Font name AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-PosterCompressed Bookman Bookman Demi Bookman Demi - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 139
Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (WG) CG Times (WG) Bold CG Times (WG) Bold Italic CG Times (WG) Italic CG Times (WL) CG Times (WL) Bold CG Times (WL) Bold Italic CG Times (WL) Italic CG Times (WR) CG Times (WR) Bold CG Times - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 140
Courier Actual fonts resident on forms card cgomega-italic cg-omega-italic cgtimes cg-times cgtimes-bold cg-times-bold cgtimes-bolditalic cg-times-bolditalic cgtimes-italic cg-times-italic chicago chicagoce clarendon clarendon-condensed-bold clarendon-light clarendon-bold clarendonce clarendonce - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 141
Font name Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-Italic Courier-ItalicTT - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 142
Font name Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-BoldCondensed GillSansCE-BoldItalic GillSansCE- - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 143
Font name Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE HelveticaCE-Black HelveticaCE- - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 144
HoeflerTextCE-BlackItalic HoeflerTextCE-Italic HoeflerTextCE-Regular HoeflerText-Italic HoeflerText-Ornaments HoeflerText-Regular Intl-CG-Times Intl-CG-Times-Bold Intl-CG-Times-BoldItalic Intl-CG-Times-Italic Intl-Courier Intl-Courier-Bold Intl-Courier-BoldOblique Intl-Courier-Oblique Intl-Univers - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 145
Font name Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE JoannaMTCE-Bold JoannaMTCE-BoldItalic - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 146
Font name LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold NewCenturySchlbkCE-BoldItalic NewCenturySchlbkCE- - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 147
-BoldItalic StempelGaramondCE-Italic StempelGaramondCE-Roman StempelGaramond-Italic StempelGaramond-Roman Symbol SymbolExtension SymbolMT SymbolSet SymbolTT Taffy Tekton Times New Roman Actual fonts resident on forms card palatino-bold palatino-bolditalic palatino-italic palatino-roman - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 148
-ItalicTT TimesNewRomanPS-BoldItalicMT TimesNewRomanPS-BoldMT TimesNewRomanPS-ItalicMT TimesNewRomanPSMT TimesNewRomanTT Times-Roman Univers Univers (W1) Univers (W1) Bold timesnewromanps-boldmt timesnewromanps-italicmt timesnewromanpsmt timesnewromantt times-roman univers intl-univers-medium intl- - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 149
Font name Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (WR) Bold Italic Univers (WR) - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 150
Font name UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-Condensed-BoldItalic Univers- - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 151
Double-byte Forms Card fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on Forms Card. - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 152
printer. Add memory to printer. Add memory to printer. Missing or corrupt file- download formsets again. Missing or corrupt file- download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Download formset again. Add memory to printer. User - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 153
PDF printer. Add memory to printer. Add memory to printer. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. User - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 154
error at PDF API PDFLIB failure. PJC XML parse error. Invalid FieldMap. PJC XML parse error. Invalid FieldName. Printer out of memory LFF file Solution Add memory to printer. Add memory to printer. Contact Lexmark Service. Contact Lexmark Service. Missing or corrupt file- download - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 155
file missing required element: %s Error type LFM file Insufficient memory XML error XML error Solution Missing or corrupt file- download formsets again. Add memory to printer. Possible corrupt file- download formsets again. Possible corrupt file- download formsets again. Forms print errors 152 - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 156
!ERR: 12 Invalid Character PostScript error messages To assist with troubleshooting, the Forms and Bar Code Card generates error messages when an bar code condition occurs. PostScript error reporting must be enabled on the printer for these messages to be printed out. If an error occurs during - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 157
Errors common to all symbologies Error code 1 2 3 4 5 6 7 8 9 10 11 18 19 Error description Unexpected error NULL data Invalid structure No active bar codes Structure out of range Parameter buffer NULL Parameter buffer too small Parameters not saved Unknown bar code type Unknown bar code ID - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 158
String errors Invalid String Character Empty Error code 12 13 EAN/JAN 8/113 X EAN/UCC Composite X French Post X German Post X HIBC X ISBN X ISSN X ITF14 X Japan Post X MaxiCode MicroPDF417 MSI Plessey X X OMR X X PDF417 X PLANET X QR Code X RSS14 X Singapore - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 159
Errors specific to symbologies Error code 20 21 22 23 24 25 26 27 28 29 columns not in range rows not in range negative module size Invalid Where flag Invalid What flag Invalid Date/Time Invalid Format Product/Catalog number too long Unit measure digit only Invalid lot number Common error messages - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 160
Error code 52 53 54 55 56 57 58 60 61 62 63 Symbology HIBC HIBC HIBC Intelligent Mail MaxiCode MaxiCode MSI Plessey MicroPDF MicroPDF MicroPDF MicroPDF Error description Special link char missing Invalid 2-digit quantity Invalid 5-digit quantity Invalid bar code identifier Invalid encoding string - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 161
HP BDP"), or the Lexmark Bar Code Card version bar code scan contains only uppercase support lowercase "a-z" character input, and does not translate to uppercase, and is operating per the specifications in the URLs noted above. Therefore, the Forms and Bar Code Card firmware bar code image itself is - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 162
that leads to garbled images. The maximum amount of input data is shown in the table below. This table is just a guide, not an absolute definition of capability, and could change upward or downward depending on the following assumptions: • Amount of RAM in the printer • Version of BCE • Compiler - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 163
and descenders are used, and the bar code scans correctly with a verifier. A change in the BCE to address this minor difference may be implemented in a later version. Note: Exact size compatibility of certain 4-State bar code image sizes with previous Lexmark bar code options is not assured. However - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 164
images with previous Lexmark bar code options is not assured. However, the bar code will still scan correctly. If the bar code image does not fit within the available space, then users by the AIM specification, but users should never exceed these values. If users were to change to other printing - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 165
text characters should be allowed and truncated by firmware before the BCE is called. The remaining much of that data as possible. The original LXK BCC will encode more than the maximum amount allowed by the AIM specification, but users should never exceed these values. If users were to change - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 166
manual version 3.2, and the HP BarDIMM Technical Reference manual supported should be a single symbol, specified as: 1,1,01234567...... where 1,1, represents the Structured Append; and 01234567.... represents the rest of the MaxiCode data structure. The HP spec BarDIMM specification . Users should - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 167
Any other separator characters should produce an error on the page. 3 MaxiCode Separator Change (add a second separator character) In the past, for all modes, the input on the scanner used, it may not produce a valid scan. If an old-style 3-byte structured append is specified alone, then - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 168
firmware-imposed limits on certain bar codes. These limits are less than the original LXK BCC, but are needed to prevent corruption of bar code images absence of start/stop characters, if users attempt to encode a Codabar bar code does not work as on previous Lexmark Bar Code options. The barcodepath - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 169
be flushed. The printer will then return to Ready state. • If the Print PS Error setting of the printer is turned off, then the job will be flushed and the printer will return to is no known French Post specification for this bar code other than what exists in the current HP BDP technical reference - Lexmark X925 | Forms and Bar Code Card Technical Reference Guide - Page 170
www.lexmark.com
www.lexmark.com
May
2011
Forms and Bar Code Card
3.2
Technical Reference Manual