Lexmark X925 Forms and Bar Code Card Technical Reference Guide - Page 48
the Space Width Narrow is 00 0C
View all Lexmark X925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Byte 8 Field name Bar/Space Width Units 9-10 Bar Width #1 11-12 Space Width #1 13-14 Bar Width #2 (Wide) Type Range Default value Description int 0=default 0 or 2 (dec) Optional (1/600" units) 00 or 02 (hex) Specifies units for bar and space 1=1/300" widths units 2=1/600" units 3=1/1200" units [int int] 12-24 (dec) 00 0C-00 18 (hex) 12 (dec) 00 0C (hex) Optional Note: Values that go beyond the defined range are appropriately clipped and set to the minimum and maximum values. The default bar code engine ITF-14 narrow bar width is 0.02 inches. If byte 5 is default 00 (600 dpi), then the bar width (narrow) is 00 0C (hex) or 12 (dec). [int int] 12-24 (dec) 00 0C-00 18 (hex) 12 (dec) 00 0C (hex) Optional Note: Values that go beyond the defined range are appropriately clipped and set to the minimum and maximum values. The default bar code engine ITF-14 narrow space width is 0.02 inches. If byte 5 is default 00 (600 dpi), then the Space Width (Narrow) is 00 0C (hex) or 12 (dec). [int int] 27-72 (dec) 00 1B-00 48 (hex) Note: The range of values for Bar Width 2 depends on the value of Bar Width 1, where min = 2.25 x Bar Width 1, max = 3 x Bar Width 1 Note: The default value for Bar Width 2 depends on the value of Bar Width 1, where default = 2.50 x Bar Width 1 Optional Note: Values that go beyond the defined range are appropriately clipped and set to the minimum and maximum values. One-dimensional bar codes 45