Lexmark XS748 Printer Languages and Interfaces Technical Reference - Page 83

LFAX PHONENUMBER command, LDOWNLOADTARGET command, LFAX PHONENUMBER, values

Get Lexmark XS748 PDF manuals and user guides View all Lexmark XS748 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Printer job language 83 Note: The byte value for the CHAR parameter is the code point of the ASCII character used for the escape character. For example, at the factory, the printer uses 0x1B (character ) for the escape character. If CHAR = 65 is specified with this command, the printer uses 0x41 (character A) as the escape character for the host interface port specified via the PORT parameter. LFAX PHONENUMBER command This command tells the printer that the output resulting from the current job is sent to the fax processing device instead of to the printer. The current job is printed and is not sent to the fax processing device if one of the following occurs: • The printer is not configured for fax send capability. • The command is received with a command that selects an interpreter that does not support formatting functionality for sending faxes. Syntax: @PJL LFAX PHONENUMBER="number" [STATIONID="station name"][] Notes: • The PHONENUMBER parameter is a text string up to 60 characters. If an unsupported character is supplied in the PHONENUMBER parameter, then the entire LFAX PHONENUMBER command is ignored. • The STATIONID parameter specifies a station name that is set to the receiving fax machine to indicate the origin of an incoming fax. The station name is a text string which is truncated to 20 characters. A null value (" ") indicates that no station ID is specified. If no station name is specified, then the default station name of the printer is used. LFAX PHONENUMBER number values Character Description 0-9 DTMF† digits 0 to 9 * DTMF† character * # DTMF† character # A-D DTMF† character A, B, C, and D ! Flash W Wait for dial tone @ Wait for silence & Wait for credit card tone , Pause ^ Toggles between tone and pulse modes † Dual Tone Multi‑Frequency (DTMF) is the system used by touch‑tone telephones which assigns a specific frequency or tone to each key so a microprocessor can easily identify it. LDOWNLOADTARGET command This command specifies the target device for downloaded files. The target can be RAM, flash memory, or hard disk.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
Note:
The
byte
value for the
CHAR
parameter is the code point of the ASCII character used for the escape
character. For example, at the factory, the printer uses 0x1B (character <ESC>) for the escape character. If
CHAR
= 65 is specified with this command, the printer uses 0x41 (character A) as the escape character for the
host interface port specified via the PORT parameter.
LFAX PHONENUMBER command
This command tells the printer that the output resulting from the current job is sent to the fax processing device
instead of to the printer.
The current job is printed and is not sent to the fax processing device if one of the following occurs:
•
The printer is not configured for fax send capability.
•
The command is received with a command that selects an interpreter that does not support formatting
functionality for sending faxes.
Syntax:
@PJL LFAX PHONENUMBER="number" [STATIONID="station name"][<CR>]<LF>
Notes:
•
The
PHONENUMBER
parameter is a text string up to 60 characters. If an unsupported character is
supplied in the
PHONENUMBER
parameter, then the entire
LFAX PHONENUMBER
command is ignored.
•
The
STATIONID
parameter specifies a station name that is set to the receiving fax machine to indicate
the origin of an incoming fax. The
station name
is a text string which is truncated to 20 characters. A null
value (“ “) indicates that no station ID is specified. If no station name is specified, then the default station
name of the printer is used.
LFAX PHONENUMBER
number
values
Character
Description
0–9
DTMF
†
digits 0 to 9
*
DTMF
†
character *
#
DTMF
†
character #
A–D
DTMF
†
character A, B, C, and D
!
Flash
W
Wait for dial tone
@
Wait for silence
&
Wait for credit card tone
,
Pause
^
Toggles between tone and pulse modes
†
Dual Tone Multi
‑
Frequency (DTMF) is the system used by touch
‑
tone telephones which assigns a specific frequency
or tone to each key so a microprocessor can easily identify it.
LDOWNLOADTARGET command
This command specifies the target device for downloaded files. The target can be RAM, flash memory, or hard
disk.
Printer job language
83