Linksys SGE2000 Cisco SGE2000, SGE2000P Gigabit Ethernet Switch Reference Guid - Page 158
Enable IGMP Snooping Status, VLAN ID, Host Timeout, MRouter Timeout, Leave Timeout
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Chapter 9 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide IGMP Snooping Page The IGMP Snooping Page contains the following fields: • Enable IGMP Snooping Status - Indicates if IGMP Snooping is enabled on the device. IGMP Snooping can be enabled only if Bridge Multicast Filtering is enabled. The possible field values are: - Enable - Enables IGMP Snooping on the device. - Disable - Disables IGMP Snooping on the device. • VLAN ID - Specifies the VLAN ID. • IGMP Snooping Status - Indicates if IGMP snooping is enabled on the VLAN. The possible field values are: - Enable - Enables IGMP Snooping on the VLAN. - Disable - Disables IGMP Snooping on the VLAN. • Host Timeout - Indicates the amount of the time the Host waits to receive a message before it times out. The default value is 260 seconds. • MRouter Timeout - Indicates the amount of the time the Multicast router waits to receive a message before it times out. The default value is 300 seconds. • Leave Timeout - Indicates the amount of time the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout 150 Chapter 9: Configuring Multicast Forwarding IGMP Snooping