Linksys SGE2000 Cisco SGE2000, SGE2000P Gigabit Ethernet Switch Reference Guid - Page 64
Source IP Address, Prefix Length, Action, Remove, Access Profile Name, Add Profile Rule
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 4 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide - Secure Telnet (SSH) - Assigns SSH access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. - HTTP - Assigns HTTP access to the rule. If selected, users accessing the device using HTTP meeting access profile criteria are permitted or denied access to the device. - Secure HTTP (HTTPS) - Assigns HTTPS access to the rule. If selected, users accessing the device using HTTPS meeting access profile criteria are permitted or denied access to the device. - SNMP - Assigns SNMP access to the rule. If selected, users accessing the device using SNMP meeting access profile criteria are permitted or denied access to the device. • Source IP Address - Defines the interface source IP address to which the rule applies. • Prefix Length - Defines the number of bits that comprise the source IP address prefix, or the network mask of the source IP address. • Action - Defines the action attached to the rule. The possible field values are: - Permit - Permits access to the device. - Deny - Denies access to the device. This is the default. • Remove - Removes rules from the selected access profiles. The possible field values are: - Checked - Removes the selected rule from the access profile. - Unchecked - Maintains the rules attached to the access profile. 2. Click the Add button. The Add Profile Rule Page opens: Add Profile Rule Page The Add Profile Rule Page contains the following fields: • Access Profile Name - Defines the access profile name. The access profile name can contain up to 32 characters. 56 Chapter 4: Configuring Device Security Defining Access Method