Linksys SGE2000 Cisco SGE2000, SGE2000P Gigabit Ethernet Switch Reference Guid - Page 214
Of Unit, Ingress Rate Limit Status, Rate Limit, Committed Information Rate CIR
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
12 Chapter SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide Bandwidth Page The Bandwidth Page contains the following fields: • Port - Indicates the port for which the bandwidth settings are displayed. • LAG - Indicates the LAG for which the bandwidth settings are displayed. • Of Unit - Displays the stacking member for which the bandwidth settings are displayed. • Ingress Rate Limit Status - Indicates if rate limiting is defined on the interface. The possible field values are: - Enable - Enables ingress rate limiting on the interface. - Disable - Disables ingress rate limiting on the interface. • Rate Limit - Defines the amount of bandwidth assigned to the interface. The possible field values are 62-1000000 Kbps. • Committed Information Rate (CIR) - Defines CIR as the queue shaping type. The possible field value is 64-1,000,000 Kbs. • Committed Burst Size (CbS) - Defines CBS as the queue shaping type. The possible field value is 4096-16,769,020 bits. Note This field is not supported on FE ports. Modifying Bandwidth Settings 1. Click Quality of Service > General > Bandwidth. The Bandwidth Page opens: 206 Chapter 12: Configuring Quality of Service Defining General Settings