Linksys SGE2000 Cisco SGE2000, SGE2000P Gigabit Ethernet Switch Reference Guid - Page 74

Chapter 4 SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide Defining 802.1x Port based authentication enables authenticating system users on a per-port basis via a external server. Only authenticated and approved system users can transmit and receive data. Ports are authenticated via the RADIUS server using the Extensible Authentication Protocol (EAP). Port Authentication includes: • Authenticators - Specifies the port, which is authenticated before permitting system access. • Supplicants - Specifies host connected to the authenticated port requesting to access the system services. • Authentication Server - Specifies the external server, for example, the RADIUS server that performs the authentication on behalf of the authenticator, and indicates whether the supplicant is authorized to access system services. Port based authentication creates two access states: • Controlled Access - Permits communication between the supplicant and the system, if the supplicant is authorized. • Uncontrolled Access - Permits uncontrolled communication regardless of the port state. The 802.1x page configures port to use Extensible Authentication Protocol (EAP). The 802.1x section contains the following pages: • Defining 802.1X Properties • Defining Port Authentication • Defining Multiple Hosts • Defining Authenticated Host 66 Chapter 4: Configuring Device Security Defining 802.1x