Linksys SGE2000 Cisco SGE2000, SGE2000P Gigabit Ethernet Switch Reference Guid - Page 215
Interface, Egress Shaping Rate on Selected Port, Committed Information Rate CIR
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Chapter SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide 12 2. Click the Edit button. The Edit Bandwidth Page opens: Edit Bandwidth Page The Edit Bandwidth Page contains the following fields: • Interface - Indicates the interface for which the queue shaping information is displayed. The possible field values are: - Port - Indicates the port for which the bandwidth settings are displayed. - LAG - Indicates the LAG for which the bandwidth settings are displayed. • Egress Shaping Rate on Selected Port - Indicates if rate limiting is enabled on the interface. • Committed Information Rate (CIR) - Defines CIR as the queue shaping type. The possible field value is 4096 - 1,000,000 Kbs. Note This field is not supported on FE ports. • Committed Burst Size (CbS) - Defines CBS as the queue shaping type. The possible field value is 4096-16,769,020 bits. • Ingress Rate Limit Status - Indicates if rate limiting is defined on the interface. The possible field values are: - Enable - Enables ingress rate limiting on the interface. - Disable - Disables ingress rate limiting on the interface. • Ingress Rate Limit - Defines the amount of bandwidth assigned to the interface. The possible field values are 62-1000000 Kbps. 3. Modify the relevant fields. 4. Click Apply. The bandwidth settings are modified, and the device is updated. Chapter 12: Configuring Quality of Service 207 Defining General Settings