Linksys WRE54G Cisco WAP54GP Wireless-G Exterior Access Point User Guide - Page 15

The Reset Button and Ground - ip address

Page 15 highlights

Wireless-G Exterior Access Point The Reset Button and Ground The Access Point's Reset button and ground are located on the back panel. Reset Button Ground Figure 3-4: Back Panel Reset Button Ground There are two ways to Reset the Access Point's factory defaults. Either press the Reset button, for approximately ten seconds, or restore the defaults using the Access Point's Web-based Utility. Before you mount the Access Point, you must ground the Access Point (to a large piece of metal) as a precaution against electric shock. Chapter 3: Getting to Know the Wireless-G Exterior Access Point The Reset Button and Ground IMPORTANT:Resetting the Access Point will erase all of your settings (including wireless security, IP address, and power output) and replace them with the factory defaults. Do not reset the Access Point if you want to retain these settings. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

8
Chapter 3: Getting to Know the Wireless-G Exterior Access Point
The Reset Button and Ground
Wireless-G Exterior Access Point
The Reset Button and Ground
The Access Point's Reset button and ground are located on the back panel.
Reset Button
There are two ways to Reset the Access Point's factory defaults. Either press the
Reset
button, for approximately ten seconds, or restore the defaults using the Access Point's
Web-based Utility.
Ground
Before you mount the Access Point, you must ground the Access Point (to a large piece of
metal) as a precaution against electric shock.
Figure 3-4: Back Panel
Reset But-
ton
Ground
IMPORTANT:
Resetting the Access Point
will erase all of your settings (including
wireless security, IP address, and power
output) and replace them with the factory
defaults. Do not reset the Access Point if
you want to retain these settings.