Linksys WRT160N Firmware Upgrade - Page 5
Internet Explorer, Safari, IP Address, Enter], User name, Password, IMPORTANT, Router Settings > - cannot connect
UPC - 745883582983
View all Linksys WRT160N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Checking the firmware version of your router Step 1: Access the router's web-based setup page. To do this, launch a web browser such as Internet Explorer or Safari. Enter your router's IP Address on the address bar, then press [Enter]. When the login prompt appears, enter your router's User name and Password. NOTE: The default IP Address of Linksys routers is "192.168.1.1". For instructions on how to check the IP address of your router, click here. IMPORTANT: The default User name and Password is "admin" but if you have used Cisco Connect to set up your router, you may have to open the software to retrieve them. To retrieve your router User name and Password through Cisco Connect, go to Router Settings > Advanced Settings. Step 2: On the router's Setup page, check the upper right corner of the screen for the firmware version. Downloading the firmware