MSI MS-7222-020 User Guide - Page 31
Serial ATA: SATA1,SATA2 - specifications
View all MSI MS-7222-020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Hardware Setup Serial ATA: SATA1,SATA2 The SouthBridge of this mainboard supports two serial ATA connectors SATA1, SATA2. SATA1, SATA2 are dual high-speed Serial ATA interface ports. Each supports 1st generation serial ATA data rates of 150 MB/s. Both connectors are fully compliant with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard disk device. 1 7 SATA1 SATA2 SATA Pin Definition PIN SIGNAL 1 GND 3 TXN 5 RXN 7 GND PIN SIGNAL 2 TXP 4 GND 6 RXP Serial ATA cable Connect to serial ATA ports Take out the dust cover and connect to the hard disk devices MSI Reminds You... Please do not fold the serial ATA cable in a 90-degree angle, since this might cause the loss of data during the transmission. 2-15
2-15
Hardware Setup
Serial ATA: SATA1,SATA2
The SouthBridge of this mainboard supports two serial ATA connectors SATA1,
SATA2.
SATA1, SATA2 are dual high-speed Serial ATA interface ports. Each supports
1
st
generation serial ATA data rates of 150 MB/s. Both connectors are fully compliant
with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard
disk device.
PIN
SIGNAL
PIN
SIGNAL
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
SATA Pin Definition
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, since
this might cause the loss of data during the transmission.
Connect to serial ATA ports
Take out the dust cover and
connect to the hard disk
devices
Serial ATA cable
SATA1
7
1
SATA2