MSI MS-7222-020 User Guide - Page 37
Slots - software
View all MSI MS-7222-020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Hardware Setup Slots The mainboard provides one AGP slot and three 32-bit PCI bus slots. AGP (Accelerated Graphics Port) Slot The AGP slot allows you to insert the AGP graphics card. AGP is an interface specification designed for the throughput demands of 3D graphics. It introduces a 66MHz, 32-bit channel for the graphics controller to directly access main memory. The slot supports 8x/4x AGP card. AGP Slot PCI (Peripheral Component Interconnect) Slots The PCI slots allow you to insert the expansion cards to meet your needs. When adding or removing expansion cards, make sure that you unplug the power supply first. Meanwhile, read the documentation for the expansion card to make any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration. PCI Slots PCI Interrupt Request Routing The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines over which devices can send interrupt signals to the microprocessor. The PCI IRQ pins are typically connected to the PCI bus INT A# ~ INT D# pins as follows: PCI Slot 1 PCI Slot 2 PCI Slot 3 Order 1 INT A# INT B# INT C# Order 2 INT B# INT C# INT D# Order 3 INT C# INT D# INT A# Order 4 INT D# INT A# INT B# 2-21