Magnavox DV220MW9 User manual, English (US) - Page 27
Information - problem
UPC - 053818570685
View all Magnavox DV220MW9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ININFFOORMAATTIIOONN PRECAUTIONS PREPARATION BASIC OPERATIONS ADVANCED PLAYBACK RECORDING Maintenance Servicing • Please refer to relevant topics on the "Troubleshooting Guide" on page 26 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center. Cleaning the Cabinet • Wipe the front panel and other exterior surfaces of the unit with a soft cloth. • Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. Cleaning Discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records. Cleaning the Disc Lens • If this unit continues to perform improperly even after you have referred to the relevant sections and to the "Troubleshooting Guide" in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit. Disc Handling • When you handle a disc, hold it by its edge and try not to touch the surface of the disc. • Always store the disc in its protective case when not in use. • Do not glue paper or put stickers onto the disc. This may damage the disc, and the unit may not read it correctly. Auto Head Cleaning • Automatically cleans video heads as you insert or remove a cassette tape, so you can see a clear picture. • If the playback picture is blurred or interrupted while the TV broadcast is showing clear, the dirt may have accumulated on the video heads, or the usage of rental or worn cassette tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned. 1. Please visit your local audio/video store and purchase a good quality VHS video head cleaner. 2. If a Video head cleaner does not solve the problem, please call our toll free customer support line found on the cover of this manual to locate an authorized service center. Note: • Remember to read the instructions along with the video head cleaner before use. • Clean video heads only when problems occur. IR Signal Check • If the remote control does not work properly, you can test if the remote control is sending out the infrared signal with a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction. With a digital camera (including built-in camera of cellular phone): Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working. Specifications Output signal format : NTSC color Video heads : Rotary four-head Tape width : 1/2 inch (12.65 mm) Tape speeds : SP : 1-5/16 inch/sec. (33.40 mm/sec) LP : 16.67 mm/sec. SLP : 7/16 inch/sec. (11.12 mm/sec.) Disc media size : 5 inches (12 cm) / 3 inches (8 cm) Terminals : Component video output : RCA jack x 3 Y : 1 Vp-p (75 Ω) Pb : 700 mVp-p (75 Ω) Pr : 700 mVp-p (75 Ω) S-video output : Mini DIN 4-pin jack x 1 Video output : Y : 1 Vp-p (75 Ω) C : 286 mVp-p (75 Ω) RCA jack x 1 1 Vp-p (75 Ω) Coaxial digital audio output : RCA jack x 1 500 mVp-p (75 Ω) Audio output : Video input : Audio input : RCA jack x 4 2 V rms RCA jack x 2 1 Vp-p (75 Ω) RCA jack x 2 2 V rms EN Recommended circumstances of recording MP3 files : Sampling frequency : 44.1 kHz or 48 kHz Constant bit rate : 32 kbps ~ 320 kbps Remote control : Digital encoded infrared light system Operating temperature : 41°F (5 °C) to 104°F (40°C) Power requirements : 120 V AC +/- 10 %, 60 Hz +/- 0.5 % Power consumption (maximum) : 16 W (standby : 2.8 W) Dimensions : W : 17 3/16" (435 mm) H : 3 3/4" (94 mm) D : 9 3/16" (233 mm) Weight : Approx. 5.8 lbs (2.6 kg) • Designs and specifications are subject to change without notice. • If there is a discrepancy between languages, the default language will be English. 27 OPTIONAL SETTINGS TROUBLESHOOTING INFORMATION