Maytag MEW5527DDW Owners Manual - Page 13

Favorite, Adjusting the Oven Temperature - model

Page 13 highlights

Oven Cooking Adjusting the Oven Temperature Oven temperatures are carefully tested for accuracy at the factory. It is normal to notice some baking or browning differences between a new oven and an old one. As ovens get older, the oven temperature can shift. You may adjust the oven temperature if you think the oven is not baking or browning correctly. To decide how much to change the temperature, set the temperature 25 degrees higher or lower than your recipe recommends, then bake. The results of the first bake should give you an idea of how much to adjust the temperature. To adjust the oven temperature: 1. Press the Bake pad. 2. Enter 550° by pressing the appropriate number pads. 3. Press and hold the Bake pad for several seconds or until 00° appears in the display. If the oven temperature was previously adjusted, the change will be displayed. For example, if the oven temperature was reduced by 15° the display will show "-15°". 4. Press the Autoset pad to adjust the temperature. Each time the Autoset pad is pressed, the temperature changes by 5°. The oven temperature can be increased or decreased by 5° to 35°. 5. The time of day will automatically reappear in the display. You do not need to readjust the oven temperature if there is a power failure or interruption. Temperature adjustment applies to Bake, Convect Bake and Convect Roast (select models) only. Favorite The Favorite pad allows you to save the time and temperature from a Cook & Hold Bake, Convect Bake or Convect Roast (select models) cycle. To set a Favorite cycle, a Cook & Hold function must be either active or just programmed. To set a new Favorite cycle or to save a currently running Cook & Hold as a Favorite: 1. Program a Cook & Hold cycle as described in the Cook & Hold section on page 8. 2. Press and hold the Favorite pad for three seconds. • The newly set or currently running Cook & Hold cycle will be saved. • A beep will sound to indicate that the control has accepted the Favorite setting. To start a cycle programmed into Favorite: 1. Press the Favorite pad. • Time and temperature for the set Cook & Hold cycle will be displayed. (If no Cook & Hold cycle has been programmed, "nonE" is displayed.) 2. Press the Bake, Convect Bake or Convect Roast (select models) pad. • The Favorite cycle will begin immediately. • The selected cycle icon will light in the display • The cooking time will light in the display When the cooking time has elapsed: • The selected cycle icon will turn off. • The HOLD WARM icon will light. • 170° will display. To cancel a Favorite cycle in progress: 1. Press the CANCEL pad. • The stored Favorite cycle will not be affected. 2. Remove food from the oven.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

12
Oven Cooking
Favorite
The Favorite pad allows you to save the time and temperature
from a Cook & Hold Bake, Convect Bake or Convect Roast
(select models) cycle.
To set a Favorite cycle, a Cook & Hold function must be either
active or just programmed.
To set a new Favorite cycle or to save a cur-
rently running Cook & Hold as a Favorite:
1.
Program a Cook & Hold cycle as described in the Cook &
Hold section on page 8.
2.
Press and hold the Favorite pad for three
seconds.
The newly set or currently running Cook & Hold cycle
will be saved.
A beep will sound to indicate that the control has
accepted the Favorite setting.
To start a cycle programmed into Favorite:
1.
Press the Favorite pad.
Time and temperature for the set Cook & Hold cycle will
be displayed. (If no Cook & Hold cycle has been pro-
grammed, “nonE” is displayed.)
2.
Press the Bake, Convect Bake or Convect Roast (select
models) pad.
The Favorite cycle will begin immediately.
The selected cycle icon will light in the display
The cooking time will light in the display
When the cooking time has elapsed:
The selected cycle icon will turn off.
The HOLD WARM icon will light.
• 170
°
will display.
To cancel a Favorite cycle in progress:
1.
Press the CANCEL pad.
The stored Favorite cycle will not be affected.
2.
Remove food from the oven.
Adjusting the Oven Temperature
Oven temperatures are carefully tested for accuracy at the
factory.
It is normal to notice some baking or browning
differences between a new oven and an old one.
As ovens
get older, the oven temperature can shift.
You may adjust the oven temperature if you think the oven is
not baking or browning correctly.
To decide how much to
change the temperature, set the temperature 25 degrees
higher or lower than your recipe recommends, then bake.
The results of the first bake should give you an idea of how
much to adjust the temperature.
To adjust the oven temperature:
1.
Press the Bake pad.
2.
Enter 550
°
by pressing the appropriate number pads.
3.
Press and hold the Bake pad for several seconds or until
00
°
appears in the display.
If the oven temperature was previously adjusted, the
change will be displayed.
For example, if the oven tem-
perature was reduced by 15
°
the display will show “-15
°
”.
4.
Press the Autoset pad to adjust the temperature.
Each time the Autoset pad is pressed, the temperature
changes by 5
°
.
The oven temperature can be increased or
decreased by 5
°
to 35
°
.
5.
The time of day will automatically reappear in the display.
You do not need to readjust the oven temperature if there is a
power failure or interruption. Temperature adjustment applies
to Bake, Convect Bake and Convect Roast (select models)
only.
Reviewed by Stewart, Steven | Released