Maytag MSD2554VEY User Instructions - Page 12

Performance, Sheets

Page 12 highlights

PERFORMANCE DATA SHEETS Base Grille Water Filtration System Model TIWG2L/T2RFWG2 Capacity 200 Gallons (758 Liters) Model TIWG2/T2RFWG2 Capacity 200 Gallons (758 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I1"; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53. Substance Reduction Aesthetic Effects Chlorine Taste/Odor Particulate Class I1" Contaminant Reduction Lead: @ pH 6.5*** Lead: @ pH 8.5*** Mercury: @ pH 6.5 Mercury: @ pH 8.5 Benzene O-Dichlorobenzene Toxaphene Carbofuran NSF Reduction Requirements 50% reduction 85% reduction NSF Reduction Requirements 0.010 mg/L 0.010 mg/L 0.002 mg/L 0.002 mg/L 0.005 mg/L 0.6 mg/L 0.003 mg/L 0.04 mg/L Average Influent Influent Challenge Concentration Maximum Effluent 2.0182 mg/L 1333333 #/mL Average Influent 2.0 mg/L + 10% At east 1O,OOOpart c es/mL Influent Challenge Concentration 9.06 mg/L** 6600 #/mL Maximum Effluent 0.1533 mg/L 0.1400 mg/L 0.15 mg/L_+ 10% 0.15 mg/L_+ 10% 0.0005 mg/L 0.0007 mg/L 0.0058 mg/L 0.0059 mg/L 0.0154 mg/L 0.006 mg/L _+10% 0.006 mg/L _+10% 0.015 mg/L _+10% 0.0002 mg/L 0.0005 mg/L 0.0012 mg/L 1.7571 mg/L 0.015 mg/L 1.8 mg/L _+10% 0.015 mg/L _+10% 0.0250 mg/L 0.001 mg/L 0.0819 mg/L 0.08 mg/L _+10% 0.0400 mg/L Average Effluent 9.0536 mg/L 2325 #/mL Average Effluent 0.0005 mg/L 0.0006 mg/L 0.0002 mg/L 0.0003 mg/L 0.0006 mg/L 0.0066 mg/L 0.001 mg/L 0.0213 mg/L Minimum % Reduction 97.93 99.51 Minimum % Reduction 99.67 99.50 96.54 91.57 92.22 98.58 93.33 51.13 Average % Reduction 97.34 99.83 Average % Reduction 99.67 99.57 96.54 94.92 96.34 99.63 93.33 74.00 Test Parameters: pH = 7.5 + 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F to 71.6°F (20°C to 22°C). • It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised. • Use replacement cartridge T2RFWG2, part #4396841. In Canada, use replacement cartridge T2RFWG2, part #4396841 B. 2008 suggested retail price of $39.99 U.S.A./ $49.99 Canada. Prices are subject to change without notice. Model TlWG2L: Style 1 - When the filter indicator reads 10%, order a new filter. When the filter indicator reads 0%, it is recommended that you replace the filter. Style 2 - When the filter indicator light changes from green to yellow, order a new filter. When the filter indicator light changes from yellow to red, it is recommended that you replace the filter. Style 3 - When the water filter status display changes from "GOOD" to "ORDER," order a new filter. When the filter indicator reads "REPLACE," it is recommended that you replace the filter. • The product is for cold water use only. • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. • Refer to the "Assistance or Service" section for the Manufacturer's name, address and telephone number. • Refer to the "Warranty" section for the Manufacturer's limited warranty. Application Guidelines/Water Supply Parameters Water Supply Water Pressure Water Temperature Service Flow Rate City or Well 30 - 120 psi (207 - 827 kPa) 33 ° - 100°F (0.6 ° - 37.8°C) 0.5 gpm (1.9 Lpm) @ 60 psi Model TlWG2: Change the water filter cartridge every 6 months depending upon your usage. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter cartridge more often. • These contaminants are not necessarily in your water supply. While testing was performed under standard laboratory conditions, actual performance may vary. *Class II particle size: 1 um to

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

PERFORMANCE
DATA
SHEETS
Base Grille Water
Filtration
System
Model
TIWG2L/T2RFWG2
Capacity
200
Gallons
(758
Liters)
Model
TIWG2/T2RFWG2
Capacity
200 Gallons
(758
Liters)
System
tested
and
certified
by NSF International
against
NSF/ANSI
Standard
42 for the
reduction
of Chlorine
Taste and
Odor,
Particulate
Class
I1"; and
against
NSF/ANSI
Standard
53 for the reduction
of
Mercury,
Benzene,
Toxaphene,
O-dichlorobenzene,
and
Carbofuran.
This system
has been
tested
according
to
NSF/ANSI
Standards
42 and
53 for the
reduction
of the
substances
listed
below.
The
concentration
of the
indicated
substances
in water
entering
the
system
was reduced
to
a concentration
less than
or equal
to the
permissible
limit for water
leaving
the system,
as specified
in NSF/ANSI
Standards
42 and
53.
Substance
Reduction
Aesthetic
Effects
Chlorine Taste/Odor
Particulate
Class
I1"
Contaminant
Reduction
Lead: @ pH 6.5***
Lead: @ pH 8.5***
Mercury:
@ pH 6.5
Mercury:
@ pH 8.5
Benzene
O-Dichlorobenzene
Toxaphene
Carbofuran
NSF Reduction
Requirements
50% reduction
85% reduction
NSF Reduction
Requirements
0.010 mg/L
0.010 mg/L
0.002 mg/L
0.002 mg/L
0.005 mg/L
0.6 mg/L
0.003 mg/L
0.04 mg/L
Average
Influent Challenge
Influent
Concentration
2.0182
mg/L
2.0 mg/L
+ 10%
1333333
#/mL
At
east 1O,OOOpart c es/mL
Average
Influent
0.1533 mg/L
0.1400 mg/L
0.0058 mg/L
0.0059 mg/L
0.0154 mg/L
1.7571 mg/L
0.015
mg/L
0.0819
mg/L
Influent
Challenge
Concentration
0.15 mg/L_+ 10%
0.15 mg/L_+ 10%
0.006 mg/L
_+10%
0.006 mg/L
_+10%
0.015 mg/L
_+10%
1.8 mg/L
_+10%
0.015
mg/L
_+10%
0.08 mg/L
_+10%
Maximum
Average
Minimum
%
Effluent
Effluent
Reduction
9.06 mg/L**
9.0536
mg/L
97.93
6600 #/mL
2325 #/mL
99.51
Maximum
Average
Minimum
%
Effluent
Effluent
Reduction
0.0005 mg/L
0.0007 mg/L
0.0002 mg/L
0.0005 mg/L
0.0012 mg/L
0.0250 mg/L
0.001 mg/L
0.0400 mg/L
0.0005
mg/L
0.0006
mg/L
0.0002
mg/L
0.0003
mg/L
0.0006
mg/L
0.0066
mg/L
0.001
mg/L
0.0213
mg/L
99.67
99.50
96.54
91.57
92.22
98.58
93.33
51.13
Test Parameters:
pH = 7.5 + 0.5 unless otherwise
noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa).
Temp. = 68°F to 71.6°F (20°C to 22°C).
It is essential that operational,
maintenance,
and filter
replacement
requirements
be carried out for the product
to
perform
as advertised.
Use replacement
cartridge
T2RFWG2,
part #4396841.
In Canada, use replacement
cartridge
T2RFWG2,
part
#4396841 B. 2008 suggested
retail price of $39.99 U.S.A./
$49.99 Canada.
Prices are subject
to change without
notice.
Model
TlWG2L:
Style 1 - When the filter indicator reads 10%,
order a new filter. When the filter indicator reads 0%, it is
recommended
that you replace the filter.
Style 2 - When the filter indicator light changes from green to
yellow, order a new filter. When the filter indicator light changes
from yellow to red, it is recommended
that you replace the filter.
Style
3 - When the water filter status
display
changes from
"GOOD"
to "ORDER,"
order a new filter. When the filter
indicator
reads "REPLACE,"
it is recommended
that you
replace the filter.
Model
TlWG2:
Change
the water filter
cartridge
every
6 months depending
upon your usage. If the water flow to the
water dispenser
or ice maker
decreases
noticeably
before
6 months have passed, replace the water filter cartridge
more
often.
These contaminants
are not necessarily
in your water supply.
While testing was performed
under standard
laboratory
conditions,
actual performance
may vary.
Average
%
Reduction
97.34
99.83
Average
%
Reduction
99.67
99.57
96.54
94.92
96.34
99.63
93.33
74.00
The product
is for cold water use only.
Do not use with water that is microbiologically
unsafe or of
unknown
quality without
adequate
disinfection
before or after
the system.
Refer to the "Assistance
or Service"
section
for the
Manufacturer's
name, address and telephone
number.
Refer to the "Warranty"
section for the Manufacturer's
limited
warranty.
Application
Guidelines/Water
Supply Parameters
Water Supply
City or Well
Water Pressure
30 - 120 psi (207 - 827 kPa)
Water Temperature
33 ° - 100°F (0.6 ° - 37.8°C)
Service Flow Rate
0.5 gpm (1.9 Lpm) @ 60 psi
*Class
II particle
size: 1 um to <5 um
**Test requirement
is at least 100,000
particles/mL
of AC Fine Test Dust.
***Compliant
for Lead reduction
requirements
under
NSF/ANSl
Standard
53 as tested
by Pace Analytical
Services,
Inc.
® NSF is a registered
trademark
of NSF International.
12