McAfee M-2750 Product Guide - Page 20

3 Setting up the Sensor Power on the Sensor 3 Locate the label on the module and ensure that the alignment groove is down. 4 Grip the sides of the module with your thumb and forefinger and insert module into the module socket. Modules are keyed to prevent incorrect insertion. Figure 3-5 SFP module in the Sensor Monitoring port Remove a module Task 1 Disconnect the network cable from the module. 2 Release the module from the slot by pulling the bail-clasp out of its locked position. 3 Slide the module out of the slot. 4 Insert the module plug into the optical bore for protection. Power on the Sensor Before you begin Do not attempt to power on the Sensor until you have installed the Sensor in a rack, made all necessary network connections, and connected the power cable to the power supply. If you are installing a redundant power supply, you should install it as described in Installing a power supply. For true redundant operation with the optional redundant power supply, McAfee recommends that you plug each supply into a different power circuit. 20 McAfee® Network Security Platform M-2750 Sensor Product Guide