Miele CVA 7840 Operating and Installation instructions - Page 109
Connecting the electricity supply, Pushing in and aligning the coffee machine, Door opening limiters
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
*INSTALLATION* Installation Connecting the electricity supply Observe the information under "Electrical connection". Connect the coffee machine to the electricity supply. Pushing in and aligning the coffee machine Take care not to trap or damage the electrical connection when pushing the machine into the niche. Push the coffee machine all the way into the niche until you feel a resistance. Check the height of the coffee machine to make sure that it is sitting centrally in the niche and that it is level. Align the appliance if necessary. Never align the coffee machine by adjusting the door hinges. This will prevent the milk flask from attaching correctly and interfere with the milkpreparation process. Now screw the coffee machine to the cabinet. Open the appliance door. Two TX20 (25 mm) screws are included with the machine. Secure the coffee machine to the side walls of the cabinet using the screws supplied. Tighten both screws by hand. Tip: To make it easier to attach the screw on the left, you can remove the door opening limiters and increase the door opening angle to approx. 170° (see "Door opening limiters"). Make sure that there is sufficient space available and that the machine door is not going to hit an adjacent wall. Carry out a functional check on the coffee machine. Door opening limiters The coffee machine door hinges are equipped with door opening limiters that restrict the opening angle of the machine door to approx. 120°. This will prevent the machine door from hitting an adjacent wall and being damaged when opened. 109