Miele CVA 7840 Operating and Installation instructions - Page 92
Problem, Possible cause and solution, F 355, F 357-F 362, F 307 or
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Frequently Asked Questions Problem F233 F 355, F 357-F 362 F 307 or Remove the milk valve and clean it Possible cause and solution The cup-rim sensor is not inserted or is incorrectly inserted. If the main dispenser is moving upward and the cuprim sensor is bumped, e.g., with a cup, the cup-rim sensor loses its reference position. Confirm the message with OK. Reinstall the cup-rim sensor. Cup-rim detection remains inactive and the main dispenser stays in the top position until the coffee machine is next switched on. Cup-rim detection is reinitialized during the next switch-on operation. The bean system must be set up again, e.g., coffee beans have possibly got jammed. Open the machine door and remove both bean containers from the coffee machine. Close the machine door. The bean system is set up. Follow the instructions on the display. The milk valve is faulty. Remove and clean the milk valve (see "Cleaning and care - Removing and cleaning the milk valve"). 92