Miele CVA 7840 Operating and Installation instructions - Page 70
Installing the milk valve, on the front, soak the stainless-steel
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Cleaning and care Press the retainers on the left and right-hand sides of the milk-valve holder and pull the holder forward to remove it. Pull the stainless-steel bolt upward and out. Clean the individual components of the milk valve in the dishwasher. Tip: If there are any dry milk residues on the front, soak the stainless-steel bolt in warm water and a little liquid dish soap. Installing the milk valve Insert the stainless-steel bolt from above. Insert the silicone seal into the milkvalve holder. Take the holder and silicone seal apart. Insert the holder and silicone seal until they audibly click into place. 70
Cleaning and care
70
Press the retainers on the left and
right-hand sides of the milk-valve
holder and pull the holder forward to
remove it.
Take the holder and silicone seal
apart.
Pull the stainless-steel bolt upward
and out.
Clean the individual components of
the milk valve in the dishwasher.
Tip:
If there are any dry milk residues
on the front, soak the stainless-steel
bolt in warm water and a little liquid
dish soap.
Installing the milk valve
Insert the stainless-steel bolt from
above.
Insert the silicone seal into the milk-
valve holder.
Insert the holder and silicone seal
until they audibly click into place.