Miele CVA 7840 Operating and Installation instructions - Page 67
Reassembling the main dispenser, Cleaning the cup-rim sensor, Cleaning the milk flask with lid
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Cleaning and care Reinstall the stainless-steel cover. Close the appliance door. Fit cover to main dispenser will appear in the display. Confirm the message with OK. Clean the area around the main dispenser with a damp cloth. Reassembling the main dispenser The dispensing unit is easier to reassemble if the individual parts are dampened with water beforehand. Cleaning the cup-rim sensor The cup-rim sensor is located under the main dispenser. Clean the cup-rim sensor at least once a week and more often if heavily soiled. Make sure that all parts are tightly connected to one another. Reassemble the dispensing unit. Press down firmly so that the spouts become securely connected to the holder. Press the two catches together (see arrows). The cup-rim sensor is released. The cup-rim sensor can be cleaned in the dishwasher, or by hand using warm water and a little liquid dish soap. To reinstall the cup-rim sensor, press it into the holder on the main dispenser from below. Insert the dispensing unit into the coffee machine and connect the milk pipework. Cleaning the milk flask with lid The milk flask should be taken apart and cleaned every day after use. 67