Miele CVA 7840 Operating and Installation instructions - Page 71
Attach the milk-valve cover as, piece on the right-hand side.
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Cleaning and care Connect together the angular molded hose and longer milk pipework. Start by attaching the top of the molded hose to the main dispenser. The black connecting piece should be pointing to the rear. Then, connect the bottom end of the molded hose to the dispensing unit. Insert the milk pipework into the milk valve on the left and right-hand sides. Push the connecting pieces into the silicone seal as far as they will go. Check that the milk pipework is snug against the housing and that the cover can be easily attached. Tip: If necessary, screw the milk pipework backward at the connecting piece on the right-hand side. Attach the milk-valve cover as follows: insert the pin in the top righthand corner and swivel the cover backward until a proper fit is achieved. Push the left-hand bean container and maintenance container back into the coffee machine. Attach the main dispenser's stainless-steel cover. Close the appliance door. 71