Miele CVA 7840 Operating and Installation instructions - Page 55

Barista Mode, Latte Mode, Water hardness, occasional

Page 55 highlights

Settings Barista Mode This Performance Mode has been optimized for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco Mode. Latte Mode This Performance Mode has been optimized for preparing milk. Milkbased drinks can be prepared within a much shorter space of time. This mode consumes more energy than Eco Mode and Barista Mode. Party Mode This Performance Mode has been configured for the occasional intensive use of the coffee machine, e.g., for family get-togethers. Before switching off the coffee machine, empty the drip tray and fill the water container so that any pending maintenance programs are able to run. Clean the coffee machine thoroughly after intensive use, particularly the milk pipework. It may be necessary to descale the coffee machine manually and degrease the brew unit. - Cleaning status messages or cleaning prompts are suppressed and delayed until the machine is next switched on. - The Off at and Off after timers are deactivated. The coffee machine switches off 6 hours after the last sensor button was pressed. - The cup light remains permanently switched on at the maximum brightness level for as long as the coffee machine stays switched on. Water hardness Program the coffee machine to the water hardness level of your area so that it functions correctly and does not get damaged. Your local water authority will be able to tell you the hardness of the water in your area. If you are using bottled drinking water, e.g., mineral water, select settings according to the calcium content. The calcium content is given on the label of the bottle in mg/l Ca2+ or ppm (mg Ca2+/l). Do not use carbonated water. The hardness level is set to 21.8 gpg (21°dH) by default. Please note the following information about Party Mode: - The general pipework is rinsed much less frequently or not at all. The milk pipework is not rinsed until around 1 hour after milk was last dispensed. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

Settings
55
Barista Mode
This Performance Mode has been
optimized for unadulterated coffee
enjoyment. Users can enjoy coffee-
based drinks without any delay as the
coffee machine remains heated to the
brewing temperature. This mode
consumes more energy than Eco Mode.
Latte Mode
This Performance Mode has been
optimized for preparing milk. Milk-
based drinks can be prepared within a
much shorter space of time. This mode
consumes more energy than Eco Mode
and Barista Mode.
Party Mode
This Performance Mode has been
configured for the
occasional
intensive
use of the coffee machine, e.g., for
family get-togethers.
Before switching off the coffee
machine, empty the drip tray and fill
the water container so that any
pending maintenance programs are
able to run.
Clean the coffee machine thoroughly
after intensive use, particularly the
milk pipework. It may be necessary
to descale the coffee machine
manually and degrease the brew
unit.
Please note the following information
about Party Mode:
-
The general pipework is rinsed much
less frequently or not at all. The milk
pipework is not rinsed until
around 1 hour after milk was last
dispensed.
-
Cleaning status messages or
cleaning prompts are suppressed
and delayed until the machine is next
switched on.
- The
Off at
and
Off after
timers are
deactivated. The coffee machine
switches off 6 hours after the last
sensor button was pressed.
-
The cup light remains permanently
switched on at the maximum
brightness level for as long as the
coffee machine stays switched on.
Water hardness
Program the coffee machine to the
water hardness level of your area so
that it functions correctly and does not
get damaged.
Your local water authority will be able to
tell you the hardness of the water in
your area.
If you are using bottled drinking water,
e.g., mineral water, select settings
according to the calcium content. The
calcium content is given on the label of
the bottle in mg/l Ca
2+
or ppm (mg
Ca
2+
/l).
Do not use carbonated water.
The hardness level is set to 21.8 gpg
(21°dH) by default.