Miele CVA 7840 Operating and Installation instructions - Page 27
Selecting the, Setting up the bean system, Filling the bean containers, Selecting the Performance Mode
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Before first use Pull the descaling cartridge holder forward. Insert the descaling cartridge and push it upward as far as it will go. Slide the descaling cartridge holder back into place. Put the maintenance container back inside the coffee machine and close the machine door. The descaling cartridge will fill with water the next time the machine is switched off. Always wait for the coffee machine to switch itself off. Do not force the machine to switch off. Once the cleaning and descaling cartridges have been inserted, a message will appear regarding the current start time set for automatic cleaning and descaling. If you want to change the start time, tap Timer and select the required time. Confirm with OK. You can also adjust the start time for automatic cleaning and descaling at a later point. Selecting the Performance Mode You can select the appropriate mode to suit your personal preferences (see "Settings - Performance Mode"). - Eco Mode: This is an energy-saving mode. - Barista Mode: This mode has been optimized for unadulterated coffee enjoyment. - Latte Mode: In this mode, milkbased drinks can be prepared within a much shorter space of time. Select the mode you want. The coffee machine is now successfully set up for use. You can now fill the bean system. Setting up the bean system After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers. Tap Yes. If you select No, the assistant for setting up the bean system will not be shown again. Filling the bean containers The coffee machine has 2 bean container drawers on the top left and right. Open the machine door. 27