Miele CVA 7840 Operating and Installation instructions - Page 91
Problem, Possible cause and solution, F73 or, A manual maintenance, program is prematurely
View all Miele CVA 7840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Problem F73 or Check the brew unit Frequently Asked Questions Possible cause and solution The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check whether you can remove the brew unit. If you can remove the brew unit, rinse it under running water. A manual maintenance program is prematurely aborted and the following appears in the display: Push the water container in until it engages. Push the coffee ejector of the brew unit into the correct position (see image). Replace the water container in the coffee machine and close the door. Do not insert the brew unit. Switch the coffee machine on. This will initialize the brew unit motor and put it back into the start position. When Insert the brew unit appears in the display, put the brew unit back in the coffee machine. If you cannot remove the brew unit, switch the coffee machine off. Wait for approximately 2 minutes before switching the machine back on again. The water container has not been filled and inserted correctly. Check that you have selected the correct mark. The symbols marked on the water container indicate the amount of water required for the Descale Appliance: and Clean the milk pipework: maintenance programs. Fill the water container up to the relevant mark and restart the process. 91