Motorola LS2208-SR20007R User Manual - Page 23
Connecting a Synapse Cable Interface, Removing the Interface Cable, Getting Started
View all Motorola LS2208-SR20007R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started 1 - 5 Connecting a Synapse Cable Interface NOTE See the Synapse Interface Guide provided with the Synapse cable for detailed setup instructions. Symbol's Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate Synapse cable has the built-in intelligence to detect the host to which it is connected. To Host Synapse Adapter Cable Synapse Smart Cable To Scanner Figure 1-3 Synapse Cable Connection 1. Plug the Synapse adapter cable (p/n 25-32463-xx) into the bottom of the scanner, as described in Installing the Interface Cable on page 1-3. 2. Align the 'S' on the Synapse adapter cable with the 'S' on the Synapse Smart Cable and plug the cable in. 3. Connect the other end of the Synapse Smart Cable to the host. Removing the Interface Cable To remove the interface cable: 1. Unplug the installed cable's modular connector by depressing the connector clip with the tip of a screwdriver. 2. Carefully slide out the cable. 3. Follow the steps for Installing the Interface Cable on page 1-3 to connect a new cable.