Motorola LS2208-SR20007R User Manual - Page 251

Advanced Data Formatting 14 - 23 Setup Field(s) Table 14-1 Setup Field(s) Definitions Parameter Description Page Move Cursor Move Cursor To a Character Scan Move Cursor To Character, then any printable ASCII character from the Alphanumeric Keyboard. This moves the cursor to the position after the matching character. If the character is not there, the rule fails and ADF tries the next rule. 14-24 Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 14-24 Move Cursor Past a Character This action moves the cursor past all sequential occurrences of a selected character. For example, if the selected character is 'A', then the cursor moves past 'A', 'AA', 'AAA', etc. Scan Move Cursor Past Character, then select a character from the Alphanumeric Keyboard. If the character is not there, the cursor does not move (i.e., has no effect). 14-24 Skip Ahead "N" Characters Scan one of these bar codes to select the number of positions 14-25 ahead to move the cursor. Skip Back "N" Characters Scan one of these bar codes to select the number of positions 14-26 back to move the cursor. Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. Set these values using the prefix/suffix values in Table 6-4 on page 6-22. Value 1 = Scan Suffix Value 2 = Scan Prefix Values 3-6 are not applicable 14-27