Motorola LS2208-SR20007R User Manual - Page 32

2 - 8 Symbol LS2208 Product Reference Guide Mounting the Stand (optional) You can attach the base of the scanner's stand to a flat surface using two screws or double-sided tape (not provided). Two screw-mount holes Double-sided tape areas (3 places) dimensions = 1" x 2") Figure 2-6 Mounting the Stand Screw Mount 1. Position the assembled base on a flat surface. 2. Screw one #10 wood screw into each screw-mount hole until the base of the stand is secure (see Figure 2-6). Tape Mount 1. Peel the paper liner off one side of each piece of tape and place the sticky surface over each of the three rectangular tape holders. 2. Peel the paper liner off the exposed sides of each piece of tape and press the stand on a flat surface until it is secure (see Figure 2-6).