Motorola LS2208-SR20007R User Manual - Page 92
Hardware Handshaking, None, Standard RTS/CTS
View all Motorola LS2208-SR20007R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
6 - 14 Symbol LS2208 Product Reference Guide Hardware Handshaking The data interface consists of an RS-232 port designed to operate either with or without the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). Disable Standard RTS/CTS handshaking to transmit scan data as it becomes available. Select Standard RTS/CTS handshaking to transmit scan data according to the following sequence: • The scanner reads the CTS line for activity. If CTS is asserted, the scanner waits up to Host Serial Response Time-out for the host to negate the CTS line. If, after the Host Serial Response Time-out (default), the CTS line is still asserted, the scanner sounds a transmit error, and discards any scanned data. • When the CTS line is negated, the scanner asserts the RTS line and waits up to Host Serial Response Time-out for the host to assert CTS. When the host asserts CTS, the scanner transmits data. If, after the Host Serial Response Time-out (default), the CTS line is not asserted, the scanner sounds a transmit error, and discards the data. • When data transmission completes, the scanner negates RTS 10 msec after sending the last character. • The host should respond by negating CTS. The scanner checks for a negated CTS upon the next data transmission. During data transmission, the CTS line should be asserted. If CTS is deasserted for more than 50 ms between characters, the transmission aborts, and the scanner sounds a transmission error and discards the data. If this communications sequence fails, the scanner issues an error indication and discards the data. You must rescan the data. If hardware handshaking and software handshaking are both enabled, hardware handshaking takes precedence. NOTE The DTR signal is jumpered to the active state. None Scan the bar code below to disable hardware handshaking. *None Standard RTS/CTS Scan the bar code below to select Standard RTS/CTS hardware handshaking. Standard RTS/CTS