Netgear DG834 DG834v3 Reference Manual - Page 138
Step-By-Step Configuration, toFVL328
UPC - 606449029109
View all Netgear DG834 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Reference Manual for the ADSL Modem Router DG834 v3 10.5.6.0/24 LAN IP 10.5.6.1 VPNC Example Network Interface Addressing 172.23.9.0/24 Gateway A DG834 14.15.16.17 WAN IP 22.23.24.25 WAN IP Gateway B FVL328 LAN IP 172.23.9.1 Figure B-1 Note: Product updates are available on the NETGEAR, Inc. web site at http://kbserver.netgear.com/DG834 v3.asp. Step-By-Step Configuration 1. Configure the DG834 v3 as in the Gateway-to-Gateway procedures using the VPN Wizard (see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page 6-20), being certain to use appropriate network addresses for the environment. The LAN Addresses used in this example are as follows: Device DG834 v3 FVL328 WAN IP Address 14.15.16.17 22.23.24.25 LAN IP Address 10.5.6.1 172.23.9..1 LAN Subnet Mask 255.255.255.0 255.255.255.0 a. In Step 1, enter toFVL328 for the Connection Name. b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address. a. In Step 3, enter the following: • IP Address = 172.23.9.1 • Subnet Mask = 255.255.255.0 B-2 NETGEAR VPN Configuration v1.1, October 2006