Netgear FVL328 FVL328 Reference Manual - Page 186
Type the starting LAN IP Address of Gateway B, From the Secure Association drop-down box
UPC - 606449025811
View all Netgear FVL328 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2 - Choose a subnet from local address from the Tunnel can access pull-down menu. - Type the starting LAN IP Address of Gateway B (172.23.9.1 in our example) in the Local IP Remote LAN Start IP Address field. - Type the finishing LAN IP Address of Gateway B (0.0.0.0 in our example) in the Local IP Remote LAN Finish IP Address field. - Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Remote LAN IP Subnetmask field. - Type the WAN IP address (22.23.24.25 in our example) of Gateway B in the Remote WAN IP or FQDN field. Figure F-4: Figure 4 - NETGEAR FVS318 VPN Settings (part 2) - Main Mode - From the Secure Association drop-down box, select Main Mode. - Next to Perfect Forward Secrecy, select the Enabled radio button. - From the Encryption Protocol drop-down box, select 3DES. - In the PreShared Key box, type a unique text string to be used as the shared key between Gateway A and Gateway B. In this example we used hr5xb84l6aa9r6. You must make sure the key is the same for both gateways. - In the Key Life box, enter in 3600 seconds. - In the IKE Life Time, enter 28800 seconds. - Check the NETBIOS Enable box if you wish to pass NetBIOS traffic over the VPN tunnel, allowing functions such as Microsoft Network Neighborhood browsing. 3. Click the Apply button in the lower center of the screen to save all changes. This will return you to the VPN Settings screen. F-4 NETGEAR VPN Configuration FVS318 or FVM318 to FVL328 May 2004, 202-10030-02