Netgear FVL328 FVL328 Reference Manual - Page 91

FVL328 Scenario 1: How to Con the IKE and VPN Policies - review

Page 91 highlights

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2 FVL328 Scenario 1: How to Configure the IKE and VPN Policies Note: This scenario assumes all ports are open on the FVL328. You can verify this by reviewing the security settings as seen in the Rules menu. Use this scenario illustration and configuration screens as a model to build your configuration. 10.5.6.1/24 LAN IP FVL328 Gateway A Scenario 1 14.15.16.17 WAN IP 22.23.24.25 WAN IP Gateway B 172.23.9.1/24 LAN IP Figure 6-11: LAN to LAN VPN access from an FVL328 to an FVL328 Note: If you have turned NAT off, before configuring VPN IPSec tunnels you must first open UDP port 500 for inbound traffic as explained in "Example: Port Forwarding for VPN Tunnels when NAT is Off" on page 5-9. 1. Log in to the FVL328 labeled Gateway A as in the illustration. Log in to the firewall at its default LAN address of http://192.168.0.1 with its default user name of admin and default password of password, or using whatever Password and LAN address you have chosen for the firewall. 2. Configure the WAN (Internet) and LAN IP addresses of the FVL328. a. From the main menu Setup section, click the Basic Settings link. Virtual Private Networking May 2004, 202-10030-02 6-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
Virtual Private Networking
6-21
May 2004, 202-10030-02
FVL328 Scenario 1: How to Configure the IKE and VPN Policies
Note
: This scenario assumes all ports are open on the FVL328. You can verify this by reviewing
the security settings as seen in the Rules menu.
Use this scenario illustration and configuration screens as a model to build your configuration.
Figure 6-11:
LAN to LAN VPN access from an
FVL328
to an
FVL328
1.
Log in to the FVL328 labeled Gateway A as in the illustration.
Log in to the firewall at its default LAN address of
with its default user
name of
admin
and default password of
password
, or using whatever Password and LAN
address you have chosen for the firewall.
2.
Configure the WAN (Internet) and LAN IP addresses of the FVL328.
a.
From the main menu Setup section, click the Basic Settings link.
Note:
If you have turned NAT off, before configuring VPN IPSec tunnels you must first
open UDP port 500 for inbound traffic as explained in
“Example: Port Forwarding for
VPN Tunnels when NAT is Off” on page 5-9
.
Gateway
B
FVL328
Scenario 1
14.15.16.17
22.23.24.25
WAN IP
WAN IP
172.23.9.1/24
10.5.6.1/24
LAN IP
LAN IP
Gateway
A