Netgear FVL328 FVL328 Reference Manual - Page 83

Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2 Table 6-1. VPN Manual Policy Configuration Fields Field Description Encapsulated Security Payload (ESP) Configuration ESP provides security for the payload (data) sent through the VPN tunnel. Generally, you will want to enable both encryption and authentication. when you use ESP. Two ESP modes are available: • Plain ESP encryption • ESP encryption with authentication These settings must match the remote VPN endpoint. SPI - Incoming Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the remote VPN endpoint has the same value in its "Outgoing SPI" field. SPI - Outgoing Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the remote VPN endpoint has the same value in its "Incoming SPI" field. Enable Encryption Use this check box to enable or disable ESP Encryption. Encryption Algorithm If you enable ESP Encryption, then select the Encryption Algorithm: • DES - the default • 3DES -more secure Key - In Key - Out Enter the key in the fields provided. • For DES, the key should be 8 characters. • For 3DES, the key should be 24 characters. Any value is acceptable, provided the remote VPN endpoint has the same value in its Encryption Algorithm "Key - Out" field. Enter the key in the fields provided. • For DES, the key should be 8 characters. • For 3DES, the key should be 24 characters. Any value is acceptable, provided the remote VPN endpoint has the same value in its Encryption Algorithm "Key - In" field. Virtual Private Networking May 2004, 202-10030-02 6-13