Netgear FVL328 FVL328 Reference Manual - Page 190
From the Remote VPN Endpoint Address Type drop-down box, select IP Address.
UPC - 606449025811
View all Netgear FVL328 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2 Figure F-9: NETGEAR FVL328 VPN - Auto Policy (part 1) - Enter a unique name to identify this policy. This name is not supplied to the remote VPN endpoint. In our example we have used "to318" as the Policy Name. In the Policy Name field type to318. - From the IKE policy drop-down box, select the IKE Policy that was set up in the earlier step - this being the FVS318 IKE Policy. - From the Remote VPN Endpoint Address Type drop-down box, select IP Address. - Type the WAN IP Address of Gateway A (14.15.16.17 in our example) in the Remote VPN Endpoint Address Data field. - Type 300 in the SA Life Time (Seconds) field. - Type 0 in the SA Life Time (Kbytes) field. - Check the IPSec PFS check box. - From the PFS Key Group drop-down box, select Group 2 (1024 Bit). - From the Traffic Selector Local IP drop-down box, select Subnet address. - Type the starting LAN IP Address of Gateway B (172.23.9.1 in our example) in the Local IP Start IP Address field. - Type the finishing LAN IP Address of Gateway B (0.0.0.0 in our example) in the Local IP Finish IP Address field. - Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Local IP Subnet Mask field. F-8 NETGEAR VPN Configuration FVS318 or FVM318 to FVL328 May 2004, 202-10030-02