Netgear FVL328 FVL328 Reference Manual - Page 195
Appendix G NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router, Configuration Profile
UPC - 606449025811
View all Netgear FVL328 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Appendix G NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an FVL328. This case study follows the Virtual Private Network Consortium (VPNC) interoperability profile guidelines. The configuration options for the FVS328 and FWAG114 are the same. Configuration Profile The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions. Table G-1. Summary VPN Consortium Scenario: Scenario 1 Type of VPN PC/Client-to-Gateway Security Scheme: IKE with Preshared Secret/Key (not Certificate-based) Date Tested: December 2003 Model/Firmware Tested: Gateway NETGEAR FVL328 firmware v 1.5 or FWAG114 firmware v 2.1 Client FVL328 Prosafe High Speed VPN Firewall v10.1 IP Addressing: Gateway Static IP address Client Dynamic NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router G-1 May 2004, 202-10030-02