Netgear GA511 GA511 User Manual - Page 17
Basic Installation Instructions, D:\GA511\setup - xp driver
UPC - 606449035858
View all Netgear GA511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NETGEAR 10/100/1000 Mbps CardBus Adapter GA511 User Manual 2. When the Windows system boots up after installing the GA511 Gigabit CardBus Adapter, the system automatically detects the new hardware and prompts you to install the driver software for the device. Follow the prompts of the Found New Hardware Wizard to automatically use the driver installed in step 1. If you are installing more than one GA511 Gigabit CardBus Adapter, you must perform these steps for each card. Basic Installation Instructions Use the procedure below for installation on a Windows Vista, XP, 2000, 98SE 2nd edition, or Me system. FIRST, INSTALL THE GA511 SOFTWARE. a. Power on your notebook, let the operating system boot up completely, and log in as needed. b. Insert the NETGEAR Adapter Resource CD into your CD-ROM drive. The Adapter Resource CD main page will load. c. From the Windows Start menu, select Run. The Run dialog box opens. d. Enter the path to the GA511 setup.exe file on the CD. For example, if your CDROM is drive D, enter D:\GA511\setup as the path. Then, click OK. e. Follow the InstallShield Wizard steps, click Finish when done, and if prompted, restart your computer. Now, the GA511 driver and utility software are installed. Adapters Resource CD Windows Start > Run 2-3 v2.0, March 2007